Eduard 1:48 B-26B Marauder — BIG SIN is a combined package of resin and 3D-printed accessory sets for the B-26B Marauder kit from ICM. It is not an aircraft kit — it is a set of parts with which you improve a model you already have.
Responsibility details are not available.
Note: this is NOT an aircraft kit. It is a package of accessory sets from Eduard, meant to improve the plastic kit of the B-26B Marauder from ICM in 1:48 scale. The model itself has to be obtained separately. The BIG SIN line at Eduard is a package of resin (Brassin) and 3D-printed sets sold together instead of as individual sets. Do not confuse it with the BIG ED line, which are packages of photo-etch and masks — BIG SIN is about bulky, fully shaped parts.
All the parts are designed as a direct replacement for parts from the kit, so they call for no changes to the structure of the model.
Resin and 3D-printed parts cannot be glued with cement for polystyrene — it does not react with them. Use cyanoacrylate glue, and epoxy on the larger joints. Wash the parts in lukewarm soapy water before painting to remove any mold release agent or print resin residue — otherwise the paint will not hold. Cut the casting blocks off with a saw or a knife; do not snap them. Sanding dust from resin is harmful to health: sand wet and do not breathe it in. Lay down a primer before painting; the factory-painted panel and the steel belts need no painting.
The set is supplied unassembled and unpainted (except for the pre-painted panel). It is not a complete model — the package contains neither the base kit nor glue nor paints.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
