1:35 Iron Cross Masker Easycutting Jig

Voyager 1:35 Iron Cross masker easycutting jig

This product is a photo-etched metal jig from Voyager Model — it is not a kit or a vehicle accessory, but a tool for making masks. It holds patterns of German crosses (Balkenkreuz) in several sizes and supplementary numbers. Masking tape is laid on the jig and, with light pressure from a blade or a point, the shape is cut or scored into the tape — the result is an accurate, reusable mask.

What the jig is for

A marking sprayed through your own mask looks more faithful than a decal: it has no glossy film, it blends with the paint and it takes subsequent washes and dusting. The jig gives sharp, consistent crosses and numbers at a constant size across all your vehicles — and it is reusable, so it will serve on many models.

Usage tips

• Use good masking tape and a sharp blade or point; keep the pressure light.
• Transfer the cut mask onto a dried base coat and press it down well against bleed-under.
• Spray the paint in thin coats with an airbrush at low pressure.
• Lift the mask while the paint is still fresh; blend the edges with a light wash.

Who the jig is for

• For builders of German armored vehicles in 1:35 scale.
• For modelers who prefer markings sprayed through a mask.
• For those who build several vehicles and will appreciate a reusable tool.

This is a tool for making masks, not a model. Masking tape, a blade, paints and the vehicle are not included in the package.