The Reskit access ladder for the Dassault Rafale C in 1:48 scale is a resin 3D-printed accessory for dioramas and scenes with ground crew around an aircraft.
Responsibility details are not available.
A resin 3D-printed access ladder of the kind hung on the side of the fuselage on the Rafale C for the pilot to board. The fine printing handles the thin rungs and the handrails that would be difficult to cast in plastic.
It is not an aircraft model but a scenic detail accessory. It brings a standing model and an airfield diorama to life and gives a scene scale and realism. It suits a Rafale C standing on its gear in 1:48 scale.
Release the thin parts from the supports carefully, wash them free of print resin residue and glue them with cyanoacrylate glue. A primer base and flat metallic or gray shades are recommended; small scuffs come out with a dry brush.
It is supplied unpainted, as a resin 3D-printed accessory. Paints, glue and the base model are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
