1:48 Fw 190 A2 - A5 armament set (MG 17 barrel tips, MG FF barrels, MG 151 barrels in fairings) & Pitot Tube

1:48 Fw 190 A2 - A5 armament set (MG 17 barrel tips, MG FF barrels, MG 151 barrels in fairings) & Pitot Tube

10.36 €

1:48 Fw 190 A2 - A5 armament set (MG 17 barrel tips, MG FF barrels, MG 151 barrels in fairings) & Pitot Tube

MASTER 1:48 Fw 190 A-2 to A-5, an armament set and Pitot tube is a turned metal accessory: MG 17 barrel tips, MG FF barrels and MG 151 barrels in fairings. An accessory for a kit, not a model.

Scale1:48
Manufacturer MASTER
Product EAN8591111126687

Responsibility details are not available.

10.36 €
8.56 € without VAT
Out of stock – can be reserved
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

MASTER 1:48 Fw 190 A-2 to A-5, an armament set and Pitot tube

A turned metal detail set in 1:48 scale from the Polish brand MASTER, made for models of the Focke-Wulf Fw 190 fighter in the A-2 to A-5 versions. According to its name it holds the muzzles of the MG 17 machine guns, the barrels of the MG FF cannon, the barrels of the MG 151 cannon in their aerodynamic fairings and a Pitot tube. It is not a kit of the aircraft but a set of metal parts that go into a plastic model in place of the original parts from the mold.

What the set solves

The armament of the Fw 190 was split between the fuselage and the wing, so on a model there are several different types of barrel ending at once. Injection-molded plastic can manage them only as solid cylinders with a blunt tip; the muzzle is blind and the wall is necessarily thicker than the scale calls for. Turned metal brings a real bore, a precise and constant diameter along the whole length and a sharp ending. On the wing barrels in fairings, metal also keeps a regular spacing and the same overhang on both sides, which is almost impossible with hand-drilled plastic. The Pitot tube then solves the most fragile part of the whole model: in metal it is straight and survives handling.

Installation and painting tips

Cut the plastic barrels off and level the surface. Drill the holes with a pin vise, working up gradually through smaller diameters so that the hole does not wander off axis. Fit each part dry first and check from the front and from above whether the barrels point parallel and have the same overhang. Glue with super glue or epoxy. Degrease the metal with alcohol, lay a primer for metal and rather blue or chemically blacken the barrels than cover them with an opaque paint. Fit the probe and the fragile tips only after the model has been varnished and weathered.

Who the set is for

  • builders of the Fw 190 in the A-2 to A-5 versions in 1:48 scale
  • modelers who want open muzzles on all the weapons without drilling
  • those who care about the parallelism and spacing of the wing barrels
  • intermediate builders who combine metal and photo-etched accessories

The set is supplied unpainted. The kit, glue and paints are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is a set of metal replacement parts for an existing Fw 190 kit in the A-2 to A-5 versions.

The barrels of the MG 151 cannon were covered on the wing by aerodynamic fairings. The set captures that form, not bare barrels.

No. The bore is part of the turned component. You will only drill the hole in the plastic into which the metal barrel is seated.

Degrease with alcohol and lay a primer for metal. On the barrels, bluing or chemical blackening looks better than full opaque paint.

Last seen

MASTERAM720391:72

1:72 M61 A1 Vulcan - Six-barrelled rotary 20mm cannon - turned barrels with etched barrel clamps

Master 1:72 M61 A1 Vulcan - six-barreled 20 mm rotary cannon is a set of turned metal barrels of the six-barreled 20 mm rotary cannon with photo-etched clamps for the barrel cluster, in 1:72 scale.
In stock
9.16 €
MASTERAM320651:32

1:32 Fw 190 A7 - A9 armament set (MG 131 barrel tips, MG 151 barrels, MG 151 fairings) & Pitot Tube

A turned metal armament set for the Fw 190 A7 to A9 fighter in 1:32 scale. It contains the tips of the MG 131 machine guns, the barrels and fairings of the MG 151 cannons and a pitot tube.
In stock
10.36 €
MASTERAM240081:24

1:24 Harrier FRS.1 / FRS.51 - Pitot Tube & Angle Of Attack probe

MASTER 1:24 Harrier FRS.1 / FRS.51 – pitot tube and angle-of-attack probe is a set of turned metal sensors for refining a model of the carrier-based Sea Harrier.
In stock
6.60 €
CMKF352871:35

1:35 US WWII Sodier w/winter coat and an M1 rifle - Belgium 1944

US soldier in a winter coat with an M1 rifle, Belgium 1944, 1:35 — a resin figure from CMK.
In stock
13.16 €
MASTERAM481281:48

1:48 A-1 Skyraider - 20mm cannon barrels with flash hiders and Pitot Tube

Turned metal barrels for the 20 mm cannons with flash hiders and a pitot tube for the A-1 Skyraider in 1:48 scale from MASTER. The variant for machines with flash hiders on the muzzles.
In stock
10.36 €
CMKF352081:35

1:35 US mounted soldier in Afghanistan 1/35 ( 1 fig. + horse)

Mounted US soldier in Afghanistan in 1:35 scale, a resin figure with a horse from CMK. The package holds both the rider and the horse, for modern dioramas.
In stock
15.96 €
MASTERAM320781:32

1:32 F6F Hellcat - early armament (.50 cal Browning barrels with drilled cooling jackets)

Turned metal barrels of .50 caliber Browning machine guns with drilled cooling jackets for the early Grumman F6F Hellcat in 1:32 scale from MASTER. They replace the plastic barrels in the leading edge of the wing.
In stock
10.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.