Yak-3 painting masks 1:48 are a self-adhesive masking set for models of the Soviet Yak-3 fighter in 1:48 scale. They ensure sharp transitions when spraying the glazing and other details.
Responsibility details are not available.
A set of self-adhesive painting masks from the maker Omask, intended for models of the Soviet Yak-3 fighter in 1:48 scale. The masks are pre-cut from a thin self-adhesive film and follow the framing of the canopy and other elements that have to be masked while spraying exactly. It is not paint and not a kit - it is an aid that markedly speeds masking up and makes it more accurate before the paint goes on.
Lift the masks off the sheet carefully with tweezers and press them onto a clean, degreased surface. Press the edges down carefully so that the paint does not creep under the film. Lay the paint on in thin coats, ideally with an airbrush, and remove the mask while the coat is still fresh, for the sharpest possible edge.
The set is intended for modelers who want precise glazing and clean transitions on this model without slow hand masking.
This is a masking aid, not paint and not a kit. Paints are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
