29.–30. 10. z technických důvodů zavřeno. / Closed 29–30 October for technical reasons.
1:72 Douglas A-20 C Havoc and P-70 Nighthawk - Mask Set (for Special Hobby Kits)

1:72 Douglas A-20 C Havoc and P-70 Nighthawk - Mask Set (for Special Hobby Kits)

4.36 €
Add to Cart

1:72 Douglas A-20 C Havoc and P-70 Nighthawk - Mask Set (for Special Hobby Kits)

1:72 Douglas A-20C Havoc and P-70 Nighthawk – a masking set is an accessory to a plastic kit, not a model. The pre-cut masks cover the glazing during spraying.

Scale1:72
Manufacturer Special Mask
Product EAN8591111000045

Responsibility details are not available.

4.36 €
3.60 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Douglas A-20C Havoc and P-70 Nighthawk in 1:72 scale – the Special Mask masking set

This is a set of pre-cut masks, an accessory to a kit — and that kit is the one from Special Hobby. The model is not in the package. The set covers two forms of the same airframe, the A-20C bomber and the P-70 night fighter, which differ mainly in the nose and the armament while their cockpit glazing is very similar.

The real subject

The Douglas A-20 was an American twin-engine light bomber and attack aircraft that grew out of the DB-7 design and was built in large numbers. It was fast, carried a crew of three and had high-set engine nacelles. The A-20C version was the form that unified the requirements of American and British customers and went in quantity to Allied deliveries as well. The P-70 Nighthawk came about by converting the same airframe into a night fighter: the glazed nose gave way to radar and a pack of gun armament was added under the fuselage. These machines served mainly in training and in the Pacific theater.

How to use the masks

The cockpit of the A-20 is made up of several separate glazed sections, so lay the masks out side by side according to the drawing first and only then stick them down. Degrease the glazing and do not touch it with your fingers. Press the masks down from the center toward the edges so that no air stays under them. When you then spray, make sure the stream of paint does not come at a sharp angle against the edge of a mask. The cleanest result comes from this order: the interior shade, a thin coat of the base color as insurance against bleeding, and only then the camouflage itself. Take the mask off by pulling it back over itself rather than straight up, or the paint on the edge of the frame may come away with it.

Who the set is for

  • Builders of American twin-engine aircraft in 1:72 scale
  • Modelers building both the A-20C bomber and the P-70 night fighter
  • Those who want sharp frames on a cockpit with many glazed parts
  • Modelers for whom cutting tape by hand takes too much time

The set is an accessory to a plastic kit, which it does not contain. Paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is a masking set for the Special Hobby kit; the model has to be bought separately.

The P-70 came about by converting the same airframe as the A-20, so the cockpit glazing is identical or very similar and one set covers both forms.

The exact number of parts is stated on the packaging of the set.

Shortly after the paint has dried, before it is clear coated. Once coated, the edge comes away less easily.

Last seen

Special MaskM720631:72

1:72 Douglas A-20 C Havoc and P-70 Nighthawk - Mask Set (for Special Hobby Kits)

1:72 Douglas A-20C Havoc and P-70 Nighthawk – a masking set is an accessory to a plastic kit, not a model. The pre-cut masks cover the glazing during spraying.
In stock
4.36 €
New WareNWAM07221:48

1:48 A-26C-15 Invader - color schemes 1 and 2 EXPERT kabuki masks

1:48 A-26C-15 Invader - color schemes 1 and 2 EXPERT kabuki masks is a kabuki paper masking set for a model of the Douglas Invader twin-engine attack bomber, tied to color schemes number 1 and 2. It is not a kit and not decals.
In stock
9.56 €
FlyhawkFH7000201:700

1:700 WWII RN Battle Cruiser HMS Hood 1941 Trumpeter 05740

The Flyhawk 1:700 detail set for the battlecruiser HMS Hood 1941 is an accessory for a ship model, not a kit.
In stock
43.96 €
ŘOP o.s.MNFDL720331:72

1:72 Boulton Paul Defiant - Night predators of the RAF

The waterslide decal set Boulton Paul Defiant - Night predators of the RAF in 1:72 scale from the Czech publisher ROP o.s. It is not a model but additional night fighter markings for a kit.
In stock
7.96 €
MH modelsMHX720261:72

1:72 Northrop Delta Mk.II / Mk.III canopy airbrush mask for Special Hobby

A masking set for the glazing of the Northrop Delta Mk.II and Mk.III in 1:72 scale brings pre-cut templates for spraying the frames of the long glazed cabin. The set is cut for the Special Hobby kit.
In stock
3.96 €
ReskitRSM72-00211:72

1:72 F-16 two-seat - pre-cut painting masks (Revell)

1:72 F-16 two-seat - pre-cut painting masks is a set of pre-cut painting masks for the two-seat F-16. The set is cut for the Revell kit.
In stock
5.96 €
ReskitRSU48-05671:48

1:48 MiG-29 Fulcrum centerline PTB-1500 fuel tank (1 pcs)

The centerline PTB-1500 fuel tank for the MiG-29 is a 3D-printed (resin) detail set in 1:48 scale from Reskit. It is a central drop tank, not an aircraft model.
In stock
13.56 €
Hobby DesignHD02-04021:24

1:24 Toyota GR Supra Detail-up Set for Tamiya kit #24351

Toyota GR Supra 1:24, detail extras from Hobby Design for the fifth generation of the famous coupe from the Gazoo Racing division. Intended for the Tamiya 24351 kit.
In stock
27.96 €
X-ScaleXSC1440111:144

1:144 Airbus A300B4-605R Long Range - Wide Body Passenger Airliner

The Airbus A300B4-605R in 1:144 scale is a kit of the wide-body twin-engine airliner in the Long Range version from the maker X-Scale.
In stock
51.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.