An accessory for the model of the LTV A-7 Corsair II attack aircraft in 1:72 scale. Meant for adding to a kit, not for building a model on its own.
Responsibility details are not available.
The LTV A-7 Corsair II was a subsonic carrier-based attack aircraft that grew out of the shape of the F-8 fighter, but was shorter and stouter. It was powered by a single turbofan engine and made its name through its large payload and its accuracy in strikes against ground targets. It served with the US Navy and the US Air Force and flew with foreign users as well.
An accessory for the A-7 model in 1:72 scale, meant for adding to a kit. You cannot build a model on its own from it. The parts are not polystyrene, ordinary plastic cement has no effect on them and they are joined with super glue. Cut the surplus material away with a sharp blade a little way from the part and sand the rest off; before painting, wash and degrease the parts so that the paint holds. The manufacturer's instructions give the exact procedure for preparing the parts and where they go.
Before you start gluing, try the parts dry in the place they belong and remove the surplus plastic from the kit beforehand. Lay small parts out on a light surface; a dark board swallows them reliably. Apply super glue in small amounts with the tip of a toothpick, since surplus turns white as it dries and shows on the finished model. Hold the joint until the glue hardens; pressure from your hand gives a better result than a bigger drop.
For modelers who build the A-7 in 1:72 scale and want to add to the model beyond what the box holds. The kit of the aircraft, paints and glue are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
