KAB-1500Kr guided bomb, 1:48 is a 3D-printed resin replica of the heavy guided bomb with television guidance in 1:48 scale.
Responsibility details are not available.
The set holds a 3D-printed resin replica of the heavy KAB-1500Kr guided aerial bomb in 1:48 scale. It is not an aircraft model but an accessory for the external stores. Given the weight class of the real weapon, even in this scale it is a substantial piece.
The KAB-1500Kr is a guided aerial bomb in the fifteen hundred kilogram weight class with television guidance. Before release the operator in the aircraft aims at the target on a screen and the bomb then holds it by itself. A warhead this large is intended against fortified objects, bridges and extensive structures, where the smaller class is not enough. Because of the weight an aircraft carries only a small number and only on reinforced pylons.
Wash the 3D-printed parts in warm soapy water first, to get rid of any print resin residue. Cut the print supports off with a sharp blade or a fine saw as close to the part as you can and sand the marks away with respiratory protection. Resin does not bond with polystyrene cement, so use cyanoacrylate glue. Apply a thin coat of primer before painting, otherwise the paint will not hold well on the smooth print. Assemble and paint the armament separately and glue it to the pylon only once the varnish has dried, so that the fine surfaces do not get rubbed.
The set is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
