Mr. Pinvice Basic Set is a set of five hand-held micro drills from Gunze / Mr.Hobby with fixed bits of 1 / 1.5 / 2 / 2.5 / 3 mm for the fine drilling of holes in plastic and resin.
Responsibility details are not available.
A pin vise is a hand-held micro drill - a chuck with a tiny drill bit, with which you drill slowly by hand rather than by machine. This Basic set contains five separate drills, each with its own ergonomic handle and a fixed bit in the sizes 1 / 1.5 / 2 / 2.5 / 3 mm. You therefore do not have to swap anything in a chuck - you simply reach for the diameter you need.
A modeler constantly needs to drill tiny holes: to open the muzzle of a gun barrel so that it is not blind, holes for antennas, cables, pins, the mounting of armament or drain holes. An opened muzzle then looks like a real weapon - that is a big difference in realism. By hand, because a hand drill turns slowly and with feel: it does not melt the plastic (a fast drill melts plastic with heat and makes a mess), you will not drill through the part and you can feel the resistance. For fine modeling work a hand-held pin vise is both more precise and safer.
For every modeler from beginner to advanced who wants to give parts realism by drilling details out. It goes well with a vise, modeling saws and finer or spare drill bits (those break easily, so it pays off to keep some in reserve).
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!