R-27R guided missile, 1:48 is a 3D-printed resin replica of the Soviet radar-guided medium-range air-to-air missile in 1:48 scale.
Responsibility details are not available.
The set holds a 3D-printed resin replica of the R-27R air-to-air guided missile in 1:48 scale. It is not an aircraft model but an accessory for the external stores. The print keeps the characteristic shaped control surfaces of the missile, which an injection mold simplifies and thickens.
The R-27 is a Soviet medium-range air-to-air guided missile and the main armament of the MiG-29 and Su-27 fighters. The R version has semi-active radar homing, so the on-board radar of the aircraft has to illuminate the target right up to the hit. The missile is recognizable by its unusually shaped control surfaces, which recall butterfly wings and which you will not find anywhere else. It is normally carried in a pair with the heat-seeking version.
Wash the 3D-printed parts in warm soapy water first, to get rid of any print resin residue. Cut the print supports off with a sharp blade or a fine saw as close to the part as you can and sand the marks away with respiratory protection. Resin does not bond with polystyrene cement, so use cyanoacrylate glue. Apply a thin coat of primer before painting, otherwise the paint will not hold well on the smooth print. Assemble and paint the armament separately and glue it to the pylon only once the varnish has dried, so that the fine surfaces do not get rubbed.
The set is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
