1:32 HIGHLY DETAILED WHEEL SET MIG-31

Wheel set for the MiG-31 1:32 from Temp Models

A resin 3D printed set replaces the landing gear wheels of a model of the MiG-31 in 1:32 scale. The wheels show the deformation of the tire under the weight of the aircraft, which on this machine is exceptionally high. The set of the same name with the 3D suffix is cut for the 3D printed landing gear legs from Temp Models; this variant states no such tie.

The real subject

The MiG-31 is a heavy Soviet interceptor with a crew of two, intended to destroy targets at long range. It is among the heaviest fighters of all, which is reflected in the unusual arrangement of the main landing gear: the wheels are set one behind the other and spread the load over a larger area. It is precisely this arrangement that makes the landing gear of the MiG-31 an unmistakable detail. On a machine standing still the tires are clearly settled.

Building and painting tips

First wash the 3D printed parts in warm water with a little dish soap, so that they are rid of the residue of printing resin. Cut the supports off with a sharp blade or a fine saw as close to the part as possible and sand the marks down with your airways protected. Resin does not bond with cement for polystyrene, so use cyanoacrylate glue. Lay a thin coat of primer on before painting, otherwise the paint holds poorly on a smooth print. Fit the weighted wheels so that the flattened part of the tire sits on the surface, otherwise the model does not stand naturally.

Who the set is for

• Replacement landing gear wheels for a model of the MiG-31 in 1:32 scale
• Weighted tires showing the deformation under the high weight of the aircraft
• A resin 3D print with fine resolution
• The variant marked 3D is intended for the Temp Models landing gear legs
• Calls for cyanoacrylate glue and a primer under the paint

The set is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.