Etch Slide Change Parts 14

What kind of item this is

This is a replacement part from the Etch Slide range, marked with the number 14. It is not a kit, a finished model or a set to be assembled, but an individual part with which the range is completed. Etch Slide cutting blades belong to the same range.

The number in the name

Within the range the numbers tell the individual parts apart. It is not a designation of size or of a scale. Check against the manufacturer's instructions that it is number 14 you need, before you order the item.

Handling and storage

A thin metal part is strong across its face, but it bends easily over an edge. Lay it on a flat hard surface and carry it with pointed tweezers; fingers leave grease on the surface and a small part moreover flies off easily. Keep it flat and dry, with nothing laid on top. Watch out for sharp edges when handling it.

• a replacement part from the Etch Slide range, number 14
• the number tells the items within the range apart, not a size
• a thin metal part, it bends easily over an edge
• keep it flat and dry
• the use is set by the manufacturer's instructions

Who it suits

The item is intended for those who work with the Etch Slide range and need to replace or complete a part of it. You will find the procedure and the use in the manufacturer's instructions. The package contains the replacement part listed under the number 14; nothing else is part of the delivery, unless stated otherwise.