Etch Slide Change Parts 8

What kind of item this is

This is a replacement part of the Etch Slide range, listed under the number 8. It is a stand-alone item with which the range is completed, not a kit and not a finished model. Cutting blades belong to the same Etch Slide tool range.

The number eight within the range

The number tells the individual parts apart; it does not denote the size, the material or a scale. What they differ in is given in the manufacturer's instructions; go by them to check that it is number 8 you need.

Handling and storage

Work on a flat and hard surface and pick the part up with pointed tweezers. Fingers leave grease on the surface, and thin metal moreover bends more easily than one would expect; straightening it back flat practically does not work. Keep it flat, dry and unloaded. The edges tend to be sharp.

• a replacement part of the Etch Slide range, number 8
• the number tells the parts of the range apart from each other
• a thin metal part, it bends easily
• keep it flat, dry and unloaded
• the use and the procedure are set by the manufacturer's instructions

Who it is intended for

The part is intended for someone who already uses the Etch Slide range and needs to complete or renew it. You will find the particular use in the manufacturer's instructions. The package contains the replacement part listed under the number 8; nothing else is part of the delivery, unless stated otherwise.