A white polystyrene sheet 0.25 mm thick for skinning, infills and small structures. The material is identical to molded kits and is glued with ordinary liquid cement for plastics.
The coarsest clapboard pattern in this group: grooves every 2.0 mm on a sheet one millimeter thick. Reduced one to thirty-five it corresponds to a board of seventy millimeters, reduced one to seventy-two to a board of one hundred and forty-four.
A polystyrene sheet with horizontal grooves every 1.5 mm. The same spacing means a board seventy-two millimeters wide at a reduction of one to forty-eight, but only thirty-six at a reduction of one to twenty-four.
A textured styrene sheet with clapboard detail at a pitch of 1.3 mm. The groove is deep enough for the shadow to stay readable after painting, which is not the case with the finest pitches.
A white polystyrene sheet 15 x 30 cm, one millimeter thick, with a horizontal clapboard pattern. The groove spacing of 1.0 mm corresponds to a board with a cover width of one hundred and fifty millimeters at a reduction of around one to one hundred and fifty.
A sheet with siding of overlapping boards, the kind wooden houses tend to have. Thickness 1.0 mm, strip spacing 0.75 mm, sheet 150 x 300 mm. The unit of sale is one piece.
A half-millimeter styrene sheet, scribed like the side of a covered freight car, with a board line spacing of 0.95 mm. A flexible counterpart of the same pattern on a thicker sheet. Sheet size 150 x 300 mm.
A thin polystyrene sheet only half a millimeter thick, scribed to match the side of a covered freight car. The lines are likewise half a millimeter apart, so it is the finest combination in the group. Sheet 150 x 300 mm.
Cladding in the style of the side of a covered freight car. A sheet 1.0 mm thick, board line spacing 0.95 mm, sheet format 150 x 300 mm. The unit of sale is one piece.
The coarsest scribed sheet in the range. A spacing of 6.3 mm corresponds to a quarter of an inch, the groove goes 0.93 mm deep and the sheet measures one millimeter in thickness. Sheet 150 x 300 mm.
A white styrene sheet 1.0 mm with very coarse V-grooving, spacing 4.8 mm, depth 0.73 mm. The second widest spacing in the brand's range, intended for large scales and coarse planks. Sheet 150 x 300 mm.
A styrene sheet 1.0 mm thick with coarse V-grooving every 3.2 mm and a groove depth of 0.53 mm. The spacing comes from an eighth of an inch and suits large scales. Sheet size 150 x 300 mm.
A polystyrene sheet 1.0 mm with V-grooves every two millimeters, groove depth 0.40 mm. The spacing corresponds to a board roughly seven centimeters wide in 1:35 scale. Format 150 x 300 mm.
A cladding sheet in styrene, thickness 1.0 mm, V-grooves every 1.5 mm, groove depth 0.33 mm. A medium spacing suitable for buildings and vehicles in 1:48 and 1:35 scale. Sheet 150 x 300 mm.
A white polystyrene sheet 1.0 mm thick, V-grooved at a spacing of a flat one millimeter with a groove depth of 0.28 mm. Format 150 x 300 mm, the unit of sale is one piece.
A styrene sheet 1.0 mm thick with a regular system of V-grooves. The spacing between grooves is 0.75 mm and the groove depth 0.25 mm. Sheet 150 x 300 mm, sold as single pieces.
With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:
Always active
Necessary cookies
These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.
Analytical cookies
They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.
Marketing cookies
They collect information to better tailor advertising to your interests, both on and off this website.
To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.
