Fengda - Tryska 0,25 mm

Fengda 0.25 mm nozzle — a fine replacement nozzle for the airbrush

A replacement nozzle of 0.25 mm diameter for Fengda airbrushes. The nozzle is a fine, precisely machined part through which the paint passes while spraying; its diameter decides the width and fineness of the spray. The smaller 0.25 mm diameter gives a finer and more precise spray than the general-purpose 0.3 mm nozzle — it suits more detailed work and finer transitions. It serves as a replacement for a worn, clogged or damaged part.

Use

• replacing a worn, bent or damaged nozzle on a Fengda airbrush
• the finer 0.25 mm diameter — more detailed spray and finer transitions than 0.3 mm
• the nozzle and needle must be of the same diameter — pair a 0.25 mm nozzle with a 0.25 mm needle
• a smaller opening is more sensitive to coarse and unthinned paints — thin and filter the paint well
• clean it carefully with a suitable cleaner; it is a fine part prone to clogging and damage

Who the part is for

For modelers with a Fengda airbrush who want a finer and more precise spray than the general-purpose 0.3 mm nozzle gives — for details, fine transitions and more precise work. Experienced builders used to well-thinned paints will appreciate it most.

This is a small, fine part with a sensitive narrow opening — handle it carefully, do not overtighten it during fitting and protect it from bending. For correct operation always pair the nozzle with a needle of the same diameter. Keep out of the reach of children.