Styrene half round 3.0 x 350 mm from AK interactive is a semicircular polystyrene section in a package of 3 pieces for rounded trim, ducting and ribs.
Responsibility details are not available.
A section of styrene (polystyrene) with a semicircular cross section 3.0 mm wide and 350 mm long, in a package of 3 pieces. A half round has one flat side and one rounded side, which is exactly what you need where a rounded feature is to lie on a surface: the flat side seats on the surface across its whole area, while the rounded one forms the visible shape. Against a full round you do not have to deal with the section rolling on the model or holding along a narrow line only.
Divide the section by scoring from the flat side; the edge then stays clean. When gluing, apply the cement for plastics to the flat face and lay the section down along its whole length, or an irregular gap will open on the rounded side. If you want to follow a curved surface, lead the section gradually and fix it in sections, as the material will bend in a gentle curve. Spray a primer coat before painting; a rounded surface holds detail highlighting well, because light and shadow form on it naturally.
For modelers who finish off ducting, runs and rounded details on kits, and for diorama builders as well. It is one of the sections that cannot sensibly be replaced by a rectangular strip or by wire.
Glue, paints and tools are not included in the package. When cutting and sanding, work on a surface and in a well-ventilated room.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!