HAVE Glass

Mr.Paint HAVE Glass - a Special Low-Reflection Finish for an Airbrush

A special lacquer (acrylic lacquer) product from Mr.Paint for application with an airbrush. It imitates the characteristic low-reflection, flat gray-green look of the Have Glass surface treatment worn by modern American F-16 fighters with a radar-absorbent finish. The product is pre-thinned and ready to spray straight from the bottle. It is not a kit but a modeling paint and finish for treating a surface.

Use

• Creating the low-reflection flat Have Glass finish on models of modern F-16s
• Intended exclusively for application with an airbrush - ready to spray straight from the bottle
• It is applied in several thin coats, usually at lower pressure (about 10 to 25 PSI)
• Where needed it can be thinned with the matching thinner for lacquer paints from the same brand; clean your tools with a suitable airbrush cleaner

Who it is for

For modelers with an airbrush who build modern versions of the F-16 and want to reproduce the typical flat low-reflection surface faithfully. Suitable for advanced modelers who work with lacquer paints and an airbrush. It is not intended for brush application.

Lacquer (solvent-based) products are flammable and their vapors are irritant. Spray only in a well-ventilated space or in a spray booth, use a respirator and protect your skin and eyes. Keep away from fire and heat. Keep out of the reach of children.