The Art Scale lead wire with a half-round profile of 1.0 x 0.7 mm is a set of approximately 14 pieces 140 mm long for more prominent hoses and lines lying against the surface of a model.
Responsibility details are not available.
A soft lead material with a half-round cross section of 1.0 x 0.7 mm and 140 mm long; according to the manufacturer there are approximately fourteen pieces in the box. It is the heavier variant of the half-round profile of the same range, intended for features that are meant to read clearly on a model, more prominent hoses, line conduits or pipes of larger cross section. The flat side of the profile seats on the base across its whole width, so the part holds and does not twist.
Bend the wire with your fingers or with smooth-jawed tweezers and watch that the flat side faces the base. Lead holds its shape once bent and does not spring back, so the route can be fine-tuned even after it has been seated. Divide it with a sharp scalpel or with side cutters. It is bonded with super glue, which grips quickly thanks to the flat side and does not need holding; on loaded or long sections, reach for epoxy. Before painting, degrease the surface and lay on a coat of base color. The heavier profile will be appreciated above all by builders in larger scales; in small scales it could look oversized.
For modelers who detail vehicles, engines and landing gear beyond the contents of the box, and for diorama builders. Working with the material is undemanding.
Lead is a soft heavy metal. Wash your hands after working with it, do not put the material in your mouth and keep it out of reach of children.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
