Tamiya modeling paint from the LP line, a pure red shade listed under the designation LP-7. Usable whatever the scale of the model.
Responsibility details are not available.
In the LP line the shade is listed under the designation LP-7 and it is a clean, saturated red with no shift toward orange or toward burgundy. A tone like this suits everywhere red should be strong and legible: on warning areas, markings, racing stripes, small interior elements, the tips of propeller blades or figure accessories. On large areas red is the most demanding color of all, because the saturated pigment covers worse than dark shades and transitions show up on it more.
Use the thinner intended for this line and choose the thinning ratio according to the manufacturer's instructions on the packaging. Stir the container thoroughly before work so that the pigment settled at the bottom is distributed through the whole volume. Apply the paint in thin coats and let each one dry. Several thin coats give a more even surface than one heavy coat, which also floods rivets and fine lines.
Over a light base red comes out more saturated and you will need less of it, while on bare dark plastic it stays muddy. Wash and degrease the model before painting. Mark out the edges of the areas with quality masking tape and peel it off slowly and at an angle once the paint has dried, so the edge does not tear.
Thinner, brushes, an airbrush and the model are not included in the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
