SALE CONTINUES! Up to 70% off plastic model kits. Limited stock remaining on selected items! here

nálepka L-29 Delfín (15cm černá)

A sticker with the outline of the L-29 Delfin trainer, fifteen centimeters, in a dark rendition for light surfaces.

Manufacturer Omask
Product EAN5591111248648

Responsibility details are not available.

5.56 €
4.60 € without VAT
1 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The L-29 Delfin sticker in a dark rendition

A motif fifteen centimeters in size with the outline of the Czechoslovak L-29 Delfin jet trainer. The dark print is prepared for light, smooth surfaces.

The machine half of eastern Europe learned on

The Delfin first flew in 1959 and two years later won the comparative trials from which the standard trainer of the Warsaw Pact states emerged. It was built at Vodochody, and before the line stopped in the mid-1970s some three and a half thousand examples had left it. It flew in dozens of countries from Europe through the Middle East all the way to Africa, and for whole generations of pilots it was the first machine with a jet engine they ever sat in. In the West the code name Maya came to be used for it.

Applying it and looking after it

Degrease the surface with spirit and let it dry, and only then peel the covering layer off. Lay the motif down from one side and press it as you go, so that the air has time to be pushed out. It can be washed normally; only avoid a pressure jet aimed straight at the edge, which could lift the film.

Where the sticker comes into use

  • on a light-colored car or a helmet
  • on a cabinet with modeling tools
  • on the glass of a display case with domestic types
  • as a small attention for an admirer of Czechoslovak aviation

The light counterpart of the same motif is a separate item and suits a dark surface. Choose, then, according to the color of the surface the sticker is to go on.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It became the standard trainer of the Warsaw Pact states and around three and a half thousand examples were built.

The first flight took place in 1959, and production then ran until the mid-1970s.

An ordinary wash, yes. A pressure jet aimed straight at the edge can lift the film, though.

Yes, the same outline is also sold in a white rendition as a separate item.

Last seen

OmaskOMK150350

nálepka L-29 Delfín (15cm černá)

A sticker with the outline of the L-29 Delfin trainer , fifteen centimeters, in a dark rendition for light surfaces.
In stock
5.56 €
Aires/QuickboostQB725061:72

1:72 Bf 110C-1/C-2/C-3 armament cover

Quickboost armament cover for the Messerschmitt Bf 110C-1/C-2/C-3 in 1:72 scale. A resin detail part from Aires for a truer rendering of the forward armament cover.
In stock
3.56 €
BANON DESIGNBAN010-B

BAN010 light hex bolt 0,8mm - 1,2mm

Five coarser steps of the low hexagon in one package, from 0.8 mm up to 1.2 mm.
In stock
10.36 €
New WareNWAM07041:48

1:48 Heinkel He-111Z-1 BASIC kabuki masks

A set of masks in kabuki tape for the model of the He 111Z-1 in 1:48 scale, in the basic BASIC version.
In stock
11.16 €
AirfixAX00729V1:76

1:76 WWI U.S.Infantry

A set of plastic figures of First World War American infantry in 1:76 scale from the British manufacturer Airfix will extend a diorama or a display case with a foot unit in the same scale as small vehicles.
In stock
5.96 €
1:48 Percival Proctor Mk.I-25 %Stock ClearanceFavorite
EduardEX7351:48

1:48 Percival Proctor Mk.I

The set of pre-cut masks 1:48 Percival Proctor Mk.I from Eduard is intended for masking the cockpit glazing of this British aircraft. It is not a kit, but an aid for painting.
7 left
7 €5.24 € You save 1.76 €
Bravo 6B6-350371:35

1:35 U.S.M.C. (9) Baitin' the Hook Tet'68

U.S.M.C. Baiting the Hook, Tet 1968 in 1:35 scale is an unpainted figure set in casting resin from the manufacturer Bravo 6. It serves as a figure accessory for a diorama or a display case; it is not a kit of equipment.
In stock
31.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.