Narrow weld lines

Aber Narrow weld lines is a photo-etched set of narrow weld beads - a blank with which welded joints of armor plates and sheet metal are imitated on a model.

Manufacturer Aber
Product EAN8591111486231

Responsibility details are not available.

4.20 €
3.47 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Aber photo-etched narrow welds

This is neither a kit nor a finished part for a particular model, but a general-purpose blank. It is a photo-etched metal sheet on which imitations of narrow weld beads with their characteristic wavy texture are carried in long strips. The modeler cuts the length needed off the strip and glues it onto the joint of two parts, so that the impression of a welded seam results. The variant designated narrow is finer than the basic range of welds and suits secondary and less massive joints. It is made by the Polish firm Aber, a long-standing specialist in photo-etched accessories for plastic models.

Use

  • Cut off a strip of weld the length of the joint, or make it up from shorter sections.
  • Sand the surface underneath smooth so that the weld sits down with no gap.
  • Glue with cyanoacrylate glue (super glue) applied section by section, so that you have time to settle the strip.
  • On curves press the strip down gradually and shape it with a toothpick or blunt tweezers.
  • The transition at the edges can be refined with a small amount of putty and sanded once dry.

Where it is useful

Above all on military vehicles with welded hulls and turrets, where the welds are one of the most conspicuous features of the surface, and further on ship superstructures, industrial structures and dioramas. The advantage over shaping a weld from putty or from melted plastic is regularity - the bead has the same pattern and width along its whole length.

Who it is for

For more advanced modelers who work with photo-etched parts and want their welds clean and repeatable. Suitable also as a complement to a set of details otherwise under way.

Photo-etched metal has sharp edges and margins - handle with care. Cyanoacrylate glue is irritating and bonds skin, so work carefully and ventilate. Keep out of the reach of small children.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

A photo-etched strip has the same width and pattern along its whole length, so the result is regular and repeatable. Putty is shaped by hand and calls for more experience.

The name gives no scale. What decides is the width of the bead against your model; the narrow weld variant is most often used on military vehicles in larger scales.

With cyanoacrylate glue, that is super glue. Apply it in shorter sections so that you manage to settle the strip and press it down.

Yes, a thin photo-etched strip can be shaped. On curves press it down gradually with a blunt tool and glue it section by section.

Last seen

AberABRR06

Narrow weld lines

Aber Narrow weld lines is a photo-etched set of narrow weld beads - a blank with which welded joints of armor plates and sheet metal are imitated on a model.
In stock
4.20 €
Heavy HobbyHH350141:35

1:35 Fire Extinguisher Late Type For WWII Germany Panzer

A late type fire extinguisher for German WWII tanks in 1:35 scale is a 3D printed resin accessory which replaces a simplified part with a precise replica of the period fire extinguisher.
In stock
11.16 €
Heavy HobbyHH350171:35

1:35 Soviet Kontakt Explosive Reactive Armor Sets

Sets of Soviet Kontakt explosive reactive armor (ERA) in 1:35 scale are 3D printed resin accessories which add the distinctive blocks of reactive protection to Soviet tanks, damaged variants included.
In stock
21.16 €
Heavy HobbyHH35007PE1:35

1:35 Vehicle Tool Set For Panther Ausf.A For WWII Germany Panzer PE

An etched tool set fret for the Panther Ausf.A for German WWII tanks in 1:35 scale is the photo-etched version of the tool clamps which adds fine mounts and clasps to the hull of the Panther tank.
In stock
13.56 €
Heavy HobbyHH350191:35

1:35 Detail-up Sets for Möbelwagen 3.7 CM Flak auf Fgst Pz.Kpfw.IV

A detail set for the Möbelwagen 3.7cm Flak in 1:35 scale from the manufacturer Heavy Hobby - photo-etched, 3D-printed and metal parts for refining the model, not a standalone kit.
In stock
35.56 €
SBS ModelSBS3D0441:35

1:35 Sd.Kfz. 251 D series - Visors (3D-Printed / for Dragon and AFV Kits)

The 3D printed detail set Sd.Kfz. 251 Ausf. D, visors (observation flaps) in 1:35 scale for Dragon and AFV Club kits. It is an accessory for a model of the vehicle, not a model on its own.
In stock
17.16 €
SBS ModelSBS3D0451:35

1:35 Sd.Kfz. 250 (Alte)/Sd.Kfz. 251 C series Visors (3D-Printed / for Dragon / AFV Club / Takom and Academy Kits)

SBS Model 1:35 Sd.Kfz. 250 (Alte) / Sd.Kfz. 251 C, 3D-printed armored visors is a detail set of replacement hinged visors for the early versions of the German half-tracks.
In stock
17.16 €
SBS ModelSBS3D0461:35

1:35 Sd.Kfz. 234 Series - Visors (3D-Printed / for Dragon Kits)

SBS Model 1:35 Sd.Kfz. 234, 3D-printed armored visors is a detail set of replacement hinged visors for the heavy reconnaissance armored cars of the Sd.Kfz. 234 series.
In stock
17.16 €
MiniartMA530701:35

1:35 75MM SHELLS WITH “LOBSTER” SHIPPING CRATE FOR U.S. M3/M4 MEDIUM TANKS

MiniArt 53070 is a set of 75 mm shells with a wooden shipping crate of the Lobster type for American M3 and M4 medium tanks in 1:35 scale. This is an accessory for a model, not a kit.
In stock
11.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.