A self-adhesive magnetic sheet of oval shape measuring 105 x 70 mm. It is stuck to the underside of a base and the model then holds on a magnetic surface.
Responsibility details are not available.
Carrying finished figures and models about is the riskiest part of the whole business. A magnetic layer under the base solves that by letting the model sit tight on a metal surface: in a transport case with a magnetic plate, on a gaming board or on a shelf rail. At the same time the model can be taken off at any moment, without anything having to be unstuck or unscrewed.
The sheet is oval in shape and measures 105 x 70 mm, that is a size matching a large oval base. The reverse is fitted with an adhesive layer, so it is stuck on directly, with no further glue. The oval shape also suits places where the base is elongated and a round sheet would overhang at the edges.
First rid the underside of the base of dust and paint residue and degrease it; on greasy plastic the adhesive layer holds only in appearance. The shape can be trimmed with scissors or a sharp blade when the base has a different outline. Peel the backing paper away progressively and press the sheet from the center outward, so that no air is left under it. Finally press the whole area firmly for a few seconds.
A magnetic sheet holds only on magnetic metal, not on plastic, wood or aluminum. It therefore needs a counterpart of magnetic sheet metal or a magnet on the other side. The holding force is affected by the weight of the model and the smoothness of both surfaces, so with heavier figures try the hold before you set out anywhere with the model. The base, the model and a transport plate are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!