Plastruct fine I-profile in polystyrene, 1.6 mm high, with a 0.8 mm flange, 0.4 mm thick and 250 mm long is a small I-shaped structural profile for fine detailing.
Responsibility details are not available.
A small plastic structural profile with a section shaped like the letter I (an I-beam) from Plastruct in polystyrene (styrene). The profile is 1.6 mm high, the flange is 0.8 mm wide, the web is 0.4 mm thick and the length is 250 mm. The fine dimensions suit detailed girders and structures in smaller scales.
The profile cuts easily with a sharp modeling knife or a saw and is glued with cement for polystyrene, which melts the surface and joins it, or with cyanoacrylate glue. The cut edges can be sanded and the surface takes modeling paints without trouble once a primer has been applied.
This is a modeling semi-finished material (a raw plastic profile), not a kit. Glue, paints and tools are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
