Rivet Marking Set 2 from AK Interactive is a set of tools for marking rivet rows, which the manufacturer recommends for 1:48 scale.
Responsibility details are not available.
A modeling tool for restoring and creating rivet rows on plastic parts. Rivets on kits often disappear during sanding of seams, or the tooling never had them at all, and that is exactly when a surface gets re-marked. As the name suggests, this set is recommended for 1:48 scale, meaning a rivet spacing that matches this scale. The packaging states the exact package contents and spacing.
Always test the tool first on a piece of spare sprue from the same kit — plastics vary in hardness, and the right amount of pressure is best found on a test piece. Mark the path with flexible tape or a template and guide the tool along its edge with even pressure, without stopping in the middle of a row. Once finished, lightly sand the area to remove any raised edges, and go over it with fine sandpaper before applying a primer. On rounded surfaces, work in shorter sections, otherwise the row will drift.
For modelers of aircraft and vehicles in 1:48 scale who are repairing a surface after sanding or taking on their own modifications and want the riveting to match the model's scale.
The tool has sharp working parts — keep it out of reach of children and work on a firm surface. Check the exact package contents on the packaging.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
