Rivet Marking Set 3 from AK interactive is a set for marking rivet lines, which the manufacturer recommends for the large scales 1:32 and 1:35.
Responsibility details are not available.
A tool for creating and restoring rivet lines on plastic parts, intended by its name for the large scales 1:32 and 1:35. It is precisely in a large scale that riveting is most on show: the surfaces are extensive, the detail can be made out at first glance and missing or sanded-away rivets are more visible than on a small model. The exact contents of the package are not stated on the packaging.
A large scale forgives irregularity less than a small one, so it pays to mark the line out in advance with a template or tape and to guide the tool in one smooth movement. Test the pressure on a piece of sprue, as harder plastic needs more force and on soft plastic it is easy to go too far. After marking, run a fine abrasive over the area so that the raised edges around the dimples disappear, and spray primer straight away, which will show the places where the line is irregular and needs evening out. On the long surfaces of a fuselage, divide the work into shorter sections and join them at a panel line, where the transition will not be visible.
For modelers who build large aircraft and ground vehicles in 1:32 and 1:35 and want the surface detail to match the scale of the model.
The tool has sharp working parts, so keep it out of the reach of children and work on a firm surface. Check the exact contents on the packaging.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
