Aber - ship hatches in various scales (first selection) is a photo-etched set of deck hatches and manholes for ship models. It is not a kit of a ship but a set of replacement details.
Responsibility details are not available.
This photo-etched set from the Polish maker Aber brings deck hatches and manholes, that is the closable openings through which the hold and the cargo spaces of a ship are entered. The fret offers hatches in several sizes and forms, so the set is not bound to a single scale - you pick the part according to the size of the place on your model. The designation first selection means the first set of a related range whose further parts complement one another in size.
On injected parts hatches tend to be only suggested by a shallow engraving or molded with frames and locking levers that are too thick. Photo-etched sheet makes it possible to replace them with detail of the correct thickness, including fine hinges and perimeter strips. A hatch can moreover be glued in the open position and so reveal a piece of the interior - an effect you will practically never get from a molded plastic part.
Sand the original suggested hatch on the deck flat and only then glue the new part on. Separate the photo-etched parts with a scalpel against a hard support and make any bends with a bending tool or over the edge of a steel ruler. They are glued with cyanoacrylate glue applied with a pin in the smallest amount, so that it does not run in between the fine edges. Degrease the brass before painting and use a metal primer. A good result comes from a dark wash, which brings out the perimeter groove of the hatch and the hinges.
The accessory is supplied unassembled and unpainted. The base model, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!