ABS strip 0.50 x 1.00 x 350 mm is a package of ten ABS plastic strips for building parts of your own, for reinforcements and for repairs. A modeling material, not a kit.
Responsibility details are not available.
This is material for building, not a kit. The package holds ten strips of ABS of 0.50 x 1.00 mm section and 350 mm length. The numbers in the name are dimensions in millimeters, not a scale, so you can use the profile in any scale according to whatever you are building.
ABS is tougher and springier than ordinary styrene, it breaks less readily in thin parts and holds its shape better. The price for that is gluing: an ordinary thin cement for polystyrene does not dissolve ABS reliably, so make the joint with a cement intended for ABS or with super glue and roughen the mating surface lightly beforehand.
The surface of ABS is smooth and hard. Acrylic paint takes on it less well than on more matte styrene, and it is then easily rubbed off against the edge of a fingernail or tweezers when handled. A base coat is not cosmetics here but a bonding layer: it flattens the surface, unifies the material with the surrounding plastic of the kit and gives the paint something to bite into. Degrease the part before priming, sand it lightly with a fine paper and apply the primer in a thin coat, so that the sharp edge of the profile does not disappear.
For modelers who modify kits, finish interiors and scenery or make parts from scratch, and for anyone who needs a dependable source of straight profiles in an exact size.
Wear eye protection when cutting with a sharp knife and when sanding; do not breathe the sanding dust and work in a well ventilated place.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
