Tamiya Mini 4WD (+) Screwdriver PRO is a Phillips screwdriver with a shorter shank for screws of 2 to 2.6 mm, intended for the cramped spots of small chassis.
A hobby file with a hardened surface, round profile 3 mm in diameter , from Tamiya. It handles metal, carbon fiber and plastic, and the round profile reaches into holes and inside curves.
Tamiya Fine Craft Saw III (Thick) is a set of photo-etched modeling saws with a 0.15 mm blade that parts plastic with a narrower cut than an ordinary saw.
The eight-piece Tamiya tool set for radio-controlled models comes in a stand with a clear cover. The wrenches are sized for the screws and nuts common on radio-controlled models.
The Tamiya micro hammer with four interchangeable heads comes with a nylon head, a brass one and two iron ones, flat and round. The head is changed according to how hard the material under the blow is.
The Tamiya flat modeling file 10 mm wide has an overall length of 200 mm, wavy teeth and grooves against clogging. It is the narrower of the pair of flat files in the same line from the manufacturer.
The Tamiya flat modeling file 16 mm wide has an overall length of 200 mm, wavy teeth and grooves against clogging. It is the wider of the pair of flat files in the same line from the manufacturer.
The eight-piece Tamiya screwdriver and wrench set comes in a plastic case and holds three Phillips and two flat screwdrivers, two socket wrenches, a hex key and a detachable handle.
Tamiya 3 mm plastic square tube is a pack of five polystyrene square tubes with an outside size of 3 mm, an inside bore of 2 mm and a length of 400 mm.
The Tamiya Spray-Work Basic airbrush in white has a 0.3 mm nozzle and a 17 ml cup. It differs from the standard version of the same airbrush in the color of the body; the technology is the same.
Tamiya Construction Series Pla-Paper 0.05 mm is a set of four very thin plastic sheets in B4 format (364 x 257 mm). The material is almost as flexible as paper, cuts with scissors and glues with ordinary plastic cement — ideal for scratch building.
Tamiya Extra Thin Cement (Low Odor) is a very thin capillary cement for plastic models with a reduced odor. It seeps into the seam and welds the joint from the inside.
NOTE - these are not pliers. These are Tamiya replacement non-scratch jaw grips for the Non-Scratch Long Nose Pliers II , 2 sets in the package. The pliers themselves are not included and you have to own them already.
With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:
Always active
Necessary cookies
These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.
Analytical cookies
They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.
Marketing cookies
They collect information to better tailor advertising to your interests, both on and off this website.
To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.