A modeling paint in the traffic yellow shade to the RAL 1023 chart, from the Orange Line of the Hataka brand.
Responsibility details are not available.
Traffic Yellow is a deep, slightly warm yellow matching the chart shade RAL 1023. It is one of the most used warning yellows of all: traffic vehicles, construction machinery, forklifts, railings and markings in halls all carry it. On a model it suits anywhere the color is meant to shout and still stay true to the standard, that is, on vehicles with a warning finish, on airfield vehicles and on the stripes of machines and jigs.
Shake the bottle thoroughly before use, as the pigment settles. Choose the thinner and the thinning ratio according to the manufacturer instructions for this line; another thinner may curdle the paint. It goes on with an airbrush and with a brush, always in thin coats. With yellow, expect it to cover less well than dark shades: spray it over a white or light gray base and you will save yourself three extra coats.
Always try the shade out on a plastic offcut rather than straight on the model. Let the paint flash off between coats, otherwise it curdles into patches. Make sharp stripes through a mask stuck down only once the base has dried completely. Close the bottle carefully after work and wipe the thread, or it will not open next time; store it dry and away from frost. Clean the paint left in the airbrush right away, as dried yellow is far harder to get out of the nozzle.
The thinner, brushes, airbrush and a primer for under the paint are not included, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
