TS-51 Racing Blue 100ml

Tamiya TS-51 Racing Blue is a gloss synthetic lacquer spray of 100 ml, ready to spray straight away - a racing blue shade for car bodies and large areas of models.

Manufacturer Tamiya
Product EAN8591111049658

Responsibility details are not available.

7.16 €
5.92 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Tamiya TS-51 Racing Blue - gloss lacquer spray, 100 ml

TS-51 Racing Blue is a synthetic (lacquer) Tamiya spray in a gloss finish, ready for immediate use - just shake and spray. The shade is a deep racing blue intended above all for car bodies and other large areas, where it creates a smooth, even and glossy surface. The lacquer holds well on plastic and on a primer base, and once dry it can be completed with details in acrylic or enamel paints. The can holds 100 ml.

Use

  • Shake the can thoroughly before spraying and clean the surface of dust and grease.
  • Spray from a distance of about 25-30 cm in smooth passes.
  • Apply several thin coats with time to dry in between - that prevents runs and gives an even gloss.
  • Spraying onto primed plastic is recommended; the best results come in a warm and dry environment.

Who it is for

For modelers who need to paint car bodies and large areas to a high gloss quickly and evenly, with no airbrush needed. This product does not contain a paint set or a model - it is a lacquer spray on its own.

Flammable aerosol under pressure. Use only in a well-ventilated area or outdoors, away from open flame and sources of ignition. Do not expose the can to heat and do not pierce it. Keep out of the reach of children.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Yes, it is a lacquer spray ready to be sprayed straight away. Just shake it thoroughly before use; no thinning or mixing is needed.

Spray from a distance of about 25-30 cm and apply several thin coats with time to dry in between, ideally onto primed plastic.

It is a gloss racing blue intended mainly for car bodies and other large areas of models.

Last seen

TamiyaTA85051

TS-51 Racing Blue 100ml

Tamiya TS-51 Racing Blue is a gloss synthetic lacquer spray of 100 ml, ready to spray straight away - a racing blue shade for car bodies and large areas of models.
In stock
7.16 €
1:48 Supermarine Spitfire Mk.XII-25 %Stock ClearanceFavorite
EduardEX8971:48

1:48 Supermarine Spitfire Mk.XII

The Eduard 1:48 Supermarine Spitfire Mk.XII masking set holds pre-cut self-adhesive masks for covering the glazing of a model of the British fighter while the paint is sprayed.
3 leftof 4
8 €6 € You save 2 €
HasegawaHA649011:20

1:20 MechatroWeGo Mazinger Volume 1

MechatroWeGo Mazinger Volume 1 (Mazinger Z) 1:20 is a plastic kit of a stylized robot from the MechatroWeGo series in Mazinger Z colors from Hasegawa.
In stock
34.36 €
Aires/QuickboostQB482761:48

1:48 Hawker Typhoon exhaust

Resin exhausts for the Hawker Typhoon in 1:48 scale by Quickboost (Aires). A faithful replacement for the exhaust manifolds; it is not an aircraft model.
In stock
4.76 €
MN-hobby72F0301:72

1:72 Řidič autobusu ČSAD 1975

1:72 CSAD bus driver 1975 is a collector's modeling figure in the small 1:72 scale depicting a bus driver of CSAD in 1975.
In stock
2.36 €
New WareNWAM04121:48

1:48 Mask Dornier Do 17Z-10 BASIC (ICM 48243)

The New Ware 1:48 mask set for the Dornier Do 17Z-10, the BASIC level is a set of self-adhesive cut masks for the broken-up glazing and the wheels of the model of the night fighter. Target kit: ICM 48243.
In stock
5.96 €
MontexMXK483521:48

1:48 HURRICANE IIB HASEGAWA

Montex - a masking set for the Hawker Hurricane Mk.IIB in 1:48 scale - precisely die-cut self-adhesive templates for a clean spray finish on the canopy and the markings of this British fighter.
In stock
11.56 €
1:48 Spitfire Mk.I exhaust stacks-25 %Stock ClearanceFavorite
EduardED6484561:48

1:48 Spitfire Mk.I exhaust stacks

Eduard 1:48 Spitfire Mk.I exhaust stacks is a set of resin exhaust stacks with drilled outlets that replaces the solid plastic parts on a Supermarine Spitfire Mk.I model.
Last one!of 3
6 €4.52 € You save 1.48 €
LIANG ModelLIANG-04371:72

1:72 M1296 Stryker Sagged Wheels

1:72 M1296 Stryker sagged wheels is a resin set of 3D printed wheels with realistically flattened tires for models of the Stryker armored vehicle from the maker LIANG Model.
In stock
16.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.