The DSPIAE Tungsten Steel Panel Line Scriber Push Broach 1.2 mm is a push scriber of tungsten steel with a chisel edge 1.2 mm wide for wider grooves and altering the shape of parts.
Responsibility details are not available.
A push broach scriber of tungsten steel with a flat edge 1.2 mm wide. The resistance of the material grows with the width, so this tool is worked differently from the fine scribers of the range, and that is usually the reason for poor results.
The wider the edge, the larger the area biting into the plastic at once and the more force the modeler would like to apply. That, though, is exactly the opposite of the method that leads to a good groove. A wide scriber is worked in shorter strokes, with less pressure and with more frequent checks on whether the tool is running off to the side. Different materials also behave differently: softer plastic can be removed smoothly, harder molded plastic tends to leave a sharper burr behind, and resin crumbles rather than cutting. Every time you pick up a new kit, it is worth making a test stroke on an offcut of the frame.
For modelers who alter the shape of parts, deepen shallow cut-outs or need a regular groove of greater width without using a milling tool.
The sharp edge runs along the whole width. Secure the part while working, guide the stroke away from your body and remove the material taken off with a brush, so that the dust does not get into the air.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
