A 0.3 mm nozzle for an AK airbrush is a spare part, not a whole spray gun. It is intended for AK interactive brand airbrushes with a 0.3 mm tip.
Responsibility details are not available.
This is a spare part, not a whole airbrush. The nozzle is the smallest and most precise component of a spray gun: together with the needle it defines the gap through which the paint passes, and thereby decides the flow, the quality of atomization and the thinnest line the gun will draw. A diameter of 0.3 mm is the universal size for modeling work - it handles broad coats and fine camouflage alike. The part is intended for AK interactive brand airbrushes.
For anyone who sprays with an AK interactive airbrush. The nozzle is a consumable part: dried paint ruins it, as does cleaning with a hard wire and overtightening during fitting. Check the exact model of your gun before buying, because nozzles are not interchangeable between manufacturers or between ranges. When fitting, tighten only lightly, as overtightening will deform the soft metal. Clean the gun with a suitable thinner and mechanically only with a soft brush, never with a metal point. The needle and the nozzle form a matched pair, so when replacing one check the needle as well.
This is a spare part, not a whole airbrush. The spray needle, the nozzle cap and the airbrush are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
