0.7mm Hex Rivets Ver. C #Brass

Top Studio hex rivets 0.7 mm, version C (brass) are all-round bolt imitations for the body, the hood and the engine bay. The 0.7 mm figure is the rivet diameter, not a scale.

Manufacturer Top Studio
Product EAN8591111242820

Responsibility details are not available.

5.96 €
4.93 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Top Studio hex rivets 0.7 mm, version C in a brass finish

Hexagonal imitations of rivets and bolts from the Japanese brand Top Studio, 0.7 mm in diameter and in a golden brass finish. This is not a model kit but accessory detail parts fitted to a car or motorcycle model under construction. The number in the name gives the diameter of the rivet head, not the scale, so the set is not tied to one particular kit.

Where the 0.7 mm size is used

Seven tenths of a millimeter is the all-round middle of a range that covers 0.5 to 1.0 mm. Rivets this size work practically everywhere an ordinary bolt is visible on a real car: on body panels, on the quick-release fasteners and hinges of the hood, on engine covers, on the mounts of the fenders and headlights. The golden brass finish also suits places where you want to set the joints apart deliberately from the steel-silver parts around them.

Version C and the brass finish

Hex rivets come in three versions, A, B and C, with a different head shape. Version C is made in both a brass and a silver finish. The exact head geometry is not stated here. If you are building a model whose hardware should be uniform, buy all the sizes in one version, because the head shape differs between the ranges.

Tips on spacing and regularity

With riveting, regularity matters more than the head shape itself. Mark the spacing in advance with a soft pencil or with a strip of adhesive tape, which serves both as a ruler and as a stop. On curves and edges run the row along the shape of the part, not along a straight line, otherwise the rivets will visually drift. Pre-drill the holes with a micro drill bit, place the parts with tweezers and apply the glue with a wire. The brass finish can be left unpainted and simply fixed with semi-matte varnish.

Who the rivets are for

  • For modelers detailing the body, the hood and the engine bay
  • For builders looking for an all-round size usable on most joints
  • For contest builds where the fidelity of the hardware is judged
  • For more experienced builders used to micro-drilling and working with tweezers

This is not a model kit but accessory parts. The base model, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No, it is the rivet diameter. A scale is written with a colon, for example 1:20, and it does not occur in the name of this product.

Mark the spacing with a soft pencil or with a strip of adhesive tape, which serves both as a ruler and as a stop. On curves run the row along the shape of the part, not along a straight line.

Technically yes, but the head shape differs between the ranges, so the joints will not look consistent. For a uniform look, buy all the sizes in one version.

They do not. The brass finish is usually left as it is and simply fixed with semi-matte varnish. They can be painted after degreasing and priming.

Last seen

Top StudioTD23254

0.7mm Hex Rivets Ver. C #Brass

Top Studio hex rivets 0.7 mm, version C (brass) are all-round bolt imitations for the body, the hood and the engine bay. The 0.7 mm figure is the rivet diameter, not a scale.
In stock
5.96 €
Kovozávody ProstějovKPM03881:72

1:72 Shenyang J-6A

Shenyang J-6A 1:72 is an injection-molded plastic kit of the Chinese supersonic fighter from Kovozavody Prostejov.
In stock
19.16 €
MH modelsMHD320011:32

1/32 Bell X-1 Stencils

An MH models 1:32 set of water-slide decals – technical stencils for the Bell X-1 contains the small service and production lettering of this experimental rocket aircraft.
In stock
7.56 €
KelikRSK48-00131:48

1:48 F-82 (F,G)

Kelik 1:48 F-82 (F, G) is a decal set for a model of the twin-fuselage F-82 Twin Mustang fighter in the F and G versions in 1:48 scale.
In stock
19.56 €
Mr.PaintMRP282

OLIVE BROWN RAL 8008

Mr.Paint Olive Brown RAL 8008 is a lacquer model paint for the airbrush from Mr.Paint in a 30 ml bottle. The olive brown shade to the RAL 8008 standard belongs to the palette of the Israeli Air Force, and this saturated earthy tone with a yellowish undertone forms part of the camouflage. It is pre-thinned for spraying and is thinned with lacquer thinner, not with water.
In stock
5.96 €
AoshimaAO045981:700

1:700 J.M.S.D.F. DD TAKANAMI

J.M.S.D.F. DD Takanami is an injection-molded plastic kit of a modern destroyer of the Japan Maritime Self-Defense Force in 1:700 scale from Aoshima. The model is supplied unassembled and unpainted.
In stock
18.36 €
MontexMXK480571:48

1:48 P-51B Mustang

Die-cut stencils for a 1:48 model of the P-51B Mustang. They cover the busy cockpit glazing from both faces of the frames and contain two sets for the national insignia.
In stock
11.96 €
Aires/QuickboostQB483511:48

1:48 Arado Ar 196A armament

Quickboost armament for the Arado Ar 196A in 1:48 scale. Resin detail parts of the Aires brand for a more faithful rendering of the armament.
In stock
3.56 €
1:72 Lockheed C-130J-30 Hercules-25 %Stock ClearanceFavorite
EduardSS7591:72

1:72 Lockheed C-130J-30 Hercules

An Eduard photo-etched accessory set for a model of the Lockheed C-130J-30 Hercules transport aircraft in 1:72 scale. An accessory to a kit, not a model of the aircraft.
3 leftof 4
14 €10.52 € You save 3.48 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.