The etched set HGW 1:32 Albatros D.V / D.Va - Surface Details adds to a large-scale model of the German fighter fine surface metal details that injection-molded plastic cannot create. It is not a model.
Responsibility details are not available.
This is a detail photo-etched accessory, not a model of an aircraft. The set contains fine metal parts picking out the surface details of the airframe: small fittings, handles and external panels. It is intended for a large-scale model of the German single-seat Albatros D.V / D.Va fighter of the First World War in 1:32 scale.
The Albatros D.V and its strengthened D.Va version were German single-seat fighter biplanes of 1917. They were characterized by an elegant streamlined fuselage of plywood shell construction and by an inline six-cylinder engine. The machines served in numbers on the Western Front and a number of well-known German aces flew them.
The etched parts are of thin sheet (brass or steel) on a common fret. Cut the individual parts off with a sharp knife on a hard surface and make the bends exactly along the marked lines, ideally with a bender or a straight blade. Glue with cyanoacrylate; on larger areas two-part epoxy can be used for more time to set things in place. Degrease the flat sheet before painting and lay on a thin coat of primer, so that the fine relief stays sharp.
This is not a complete model of an aircraft. The set does not contain glue, paints or a kit; it serves as a detail accessory to a base model.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
