1:32 Curtiss P-40E Kittyhawk exterior

Eduard 1:32 Curtiss P-40E Kittyhawk exterior is a photo-etched set in bare brass sheet, aimed at the outer surface of the aircraft - that is, not at the cockpit and not at the gun bays. It is an accessory for a kit, not a model.

Scale1:32
Manufacturer Eduard
Product EAN8591111000000

Responsibility details are not available.

17.60 € 13.20 €
10.91 € without VAT
−25 % You save 4.40 €
1 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Eduard 1:32 Curtiss P-40E Kittyhawk exterior - photo-etched set

A set of photo-etched parts in thin brass sheet from the Czech manufacturer Eduard, intended for 1:32 scale. The word exterior in the name defines what the set covers: details of the outer surface of the airframe. The etch in this range is unpainted, unlike the colored interior sets, which come printed and self-adhesive. The set is not a kit - it is an accessory that replaces or supplements the plastic parts of the P-40E model.

How it differs from the other photo-etched sets for the same aircraft

The manufacturer divides its etch by area of use, and there are three separate sets for this aircraft: the exterior one, a gun bay set and a landing flap set. This one deals with the outside of the airframe. It therefore does not overlap with the flap set or the gun bay set and they can be combined. Compared with resin accessories, etched sheet stands out in thickness: it can show sheet-metal elements at a scale thinness that injection-molded plastic cannot manage.

The real subject

The Curtiss P-40E is a single-engine fighter with a liquid-cooled Allison V-1710 engine and a radiator placed under the nose. In British nomenclature it was known as the Kittyhawk. In the large 1:32 scale the sheet-metal details on the surface of the airframe are clearly apparent, and for technical reasons they cannot be molded in a realistic thickness in injected plastic.

Building tips

Cut the parts from the fret with a sharp knife against a hard surface, not with pliers. Make the bends on a bending tool or at least between two razor blades, so that the edge is crisp. Degrease the brass before gluing and use cyanoacrylate glue or epoxy - plastic cement does not hold on metal. A primer is advisable before painting, otherwise paint adheres badly to smooth brass. Lay the small parts out on a piece of adhesive tape so that they do not get lost.

Who the set is for

  • Modelers who want exterior detail at a scale sheet thickness
  • Builders of large scales, where coarse plastic shows the most
  • Anyone interested in American fighters of the Second World War
  • More experienced modelers with some practice in working with etch

This is an accessory for a kit, not a model. The kit, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

This exterior range comes as unpainted brass sheet. Printed, self-adhesive colored etch is reserved by the manufacturer for the interior sets.

Each covers a different area of the model. This one deals with the outer surface of the airframe, the other two with the gun bays and the landing flaps. They do not overlap and can be used alongside each other.

Cyanoacrylate glue or epoxy. Ordinary plastic cement does not dissolve brass, so it will not hold on metal.

Working with etch calls for a sharp knife, tweezers and patience when bending. It is not an ideal choice for a first model, but in the large 1:32 scale the parts are bigger and handling them is easier than in 1:72.

Last seen

1:32 Curtiss P-40E Kittyhawk exterior-25 %Stock ClearanceFavorite
EduardED324551:32

1:32 Curtiss P-40E Kittyhawk exterior

Eduard 1:32 Curtiss P-40E Kittyhawk exterior is a photo-etched set in bare brass sheet, aimed at the outer surface of the aircraft - that is, not at the cockpit and not at the gun bays. It is an accessory for a kit, not a model.
Last one!
17.60 €13.20 € You save 4.40 €
1:48 McDonnell-Douglas AV-8A Harrier early-25 %Stock ClearanceFavorite
EduardFE11641:48

1:48 McDonnell-Douglas AV-8A Harrier early

Photo-etched metal parts for a model of the AV-8A Harrier aircraft in the early treatment in 1:48 scale.
8 leftof 10
9 €6.76 € You save 2.24 €
GunzeN024

Acrysion - oranžově žlutá

An orange-yellow Acrysion acrylic for spraying with an airbrush, thinnable with water.
In stock
3.60 €
Mr.PaintMRP238

International Blue (FS 35109)

Mr.Paint International Blue (FS 35109) — a saturated blue shade to the FS 35109 standard for conspicuous blue areas, markings and aggressor schemes.
In stock
5.96 €
CMKCMK74811:72

1:72 Beaufighter Mk.I/VI Mainwheels - Early Wheel Disk / Block Tread Pattern

A resin set of main wheels for models of the Bristol Beaufighter Mk.I/VI in 1:72 scale with the early type of hub and a block tread pattern, with a weighted tire effect.
In stock
4.36 €
ReskitRS72-01691:72

1:72 Douglas B-66 Destroyer wheels se

A set of replacement landing gear wheels in 1:72 scale for a model of the Douglas B-66 Destroyer.
In stock
9.16 €
SBS ModelSBS720571:72

1:72 Generic Flat Rigging wires (0.2-0.25 mm)

Photo-etched flat rigging wires 0.2-0.25 mm in 1:72 scale from SBS Model. A universal accessory for convincing bracing of biplanes; it is not a kit.
In stock
10.76 €
1:72 Mark 82 Thermally Protected bombs (4pcs)-25 %Stock ClearanceFavorite
ReskitRS72-03441:72

1:72 Mark 82 Thermally Protected bombs (4pcs)

1:72 Mark 82 Thermally Protected bombs (4 pieces) is a resin set of four bombs with a thermally protective layer from Reskit. An accessory of armament for a model of an aircraft.
4 leftof 6
7.56 €5.68 € You save 1.88 €
1:72 Douglas A-4M Skyhawk-25 %Stock ClearanceFavorite
EduardCX6321:72

1:72 Douglas A-4M Skyhawk

1:72 Douglas A-4M Skyhawk is a set of self-adhesive masking templates from Eduard in 1:72 scale, cut to fit the glazing and the wheels of the model.
2 leftof 4
6 €4.52 € You save 1.48 €
GunzeN013

Acrysion - matná červená

A red shade drying to a flat finish. An Acrysion acrylic paint for spraying, thinned with water.
In stock
3.60 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.