1:32 Eurofighter Typhoon - exhaust nozzles (closed, early type)

1:32 Eurofighter Typhoon - exhaust nozzles (closed, early type)

15.56 €
Add to Cart

1:32 Eurofighter Typhoon - exhaust nozzles (closed, early type)

Reskit 1:32 – Eurofighter Typhoon exhaust nozzles, closed, early type are a resin replacement for the nozzle parts of the base kit in a large scale.

Scale1:32
Manufacturer Reskit
Product EAN8591111000000

Responsibility details are not available.

20.76 € 15.56 €
12.86 € without VAT
−25 % You save 5.20 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Reskit 1:32 – Eurofighter Typhoon exhaust nozzles (closed, early type)

A resin add-on set in 1:32 scale for a model of the twin-engine multirole Eurofighter Typhoon. It is not a model of the aircraft, but a replacement for the exhaust ends of both powerplants. The nozzles are done in the closed, that is narrowed position and match the earlier type, which the maker distinguishes from the later one. The casting brings thinner petal edges, finer division and a three-dimensional interior, that is detail that injection-molded plastic as a rule cannot manage in such an exposed place.

The real subject

The Typhoon is a twin-engine fighter from a European consortium powered by a pair of EJ200 engines with afterburners. The exhaust nozzles are among the most striking features of the rear end and their cross-section changes with the engine setting — on the ground and in the various phases of operation they can therefore be caught both narrowed and spread. The form of the nozzles was also reworked during service, so early and later machines are not interchangeable in this place.

Building and painting tips

Wash the parts in lukewarm water with detergent; that removes the release agent from the mold. Separate the casting blocks with a fine saw, true the seating surface on abrasive paper laid on a flat board and use respiratory protection while sanding. Cyanoacrylate secures the joint; cement for plastic will not bite into resin. Begin painting with a primer; for the metal surfaces of the nozzle, shades of burnt metal, a dark wash into the recesses and fine shading toward the exhaust all suit. Always go by photographs of the machine you are building — the position of the nozzles and the degree of sooting differ from one aircraft to another.

Who the set is for

  • Builders of Typhoon models in 1:32 scale
  • Modelers who want a faithful rear end with narrowed nozzles
  • Anyone with experience of resin and cyanoacrylate
  • Those who deliberately combine accessories with the base kit

This is an add-on set, not a model of the aircraft. The base kit, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is a narrowed exhaust cross-section. Which state matches your scene is suggested by photographs of the particular machine — the cross-section changes with the engine setting.

The maker distinguishes the two types, but the details are not stated here. So before ordering, check which type matches the machine and the period you are modeling.

It is not. It is a resin replacement for the nozzles on a model you have already bought. The kit, glue and paints are not included in the package.

They are glued with cyanoacrylate and painted, once a primer is on, in metallic shades with a dark wash into the recesses.

Last seen

1:32 Eurofighter Typhoon - exhaust nozzles (closed, early type)-25 %Stock ClearanceFavorite
ReskitRSU32-00361:32

1:32 Eurofighter Typhoon - exhaust nozzles (closed, early type)

Reskit 1:32 – Eurofighter Typhoon exhaust nozzles, closed, early type are a resin replacement for the nozzle parts of the base kit in a large scale.
4 leftof 6
20.76 €15.56 € You save 5.20 €
HAD modelsHAD481281:48

1:48 Decal AN-2 Civilian (HA-YHF)

The decal sheet HAD models 1:48 An-2 civil, the machine HA-YHF is intended for a model of the Antonov An-2 biplane in 1:48 scale.
In stock
9.96 €
Kits-WorldKW482001:48

1:48 Razorback P 47's of the 56th Fighter Group

Markings for American Thunderbolt fighter bombers in the older form with a raised fuselage spine. Two machines of the famous 56th Fighter Group, scale 1:48.
In stock
13.56 €
FineMoldsWA61:700

1:700 Radial Boat Davit Set #1 for IJN Battleship & Cruiser

FineMolds 1:700 Radial Boat Davit Set 1 is a resin add-on set of davits for lowering boats on Japanese battleships and cruisers. It is not a ship model.
In stock
12.76 €
EduardED730511:72

1:72 F-4 seatbelts grey STEEL

Eduard 1:72 pre-painted steel seatbelts for the F-4 Phantom II (gray) are a colored photo-etched accessory for the ejection seats. It is not a model but a set of belts.
In stock
8 €
QuickwheelQW-1861:35

1:35 Pz.Kpfw. IV Ausf. H - Zvezda

1:35 masking set for the road wheels of the Pz.Kpfw. IV Ausf. H — templates for the rubber tire bands of the small wheels of leaf-sprung bogies. The set is cut for the Zvezda kits.
In stock
8.76 €
Black Dog modelBDT721601:72

1:72 M13/40 Italian Tank - Accessories Set (for IBG Models kits)

1:72 M13/40 accessory set (Black Dog) is a resin accessory set of stowage and equipment for IBG Models kits of the Italian M13/40 medium tank.
In stock
11.96 €
Art ScaleASKM350251:35

1:35 Messerschmitt Bf 109G-10 double-sided painting mask for Border Model

The Art Scale double-sided masking set for the glazing of the Messerschmitt Bf 109 G-10 in 1:35 scale covers the cockpit from the outside and the inside, so the frames stay crisp after spraying when seen from either side. The masks are cut for the glazing of the Border Model kit.
In stock
7.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.