1:32 Stearman PT-17 Kaydet 2 canopy masks (interior and exterior canopy masks)

1:32 Stearman PT-17 Kaydet 2 canopy masks (interior and exterior canopy masks)

3.96 €
Add to Cart

1:32 Stearman PT-17 Kaydet 2 canopy masks (interior and exterior canopy masks)

Montex 1:32 Stearman PT-17 Kaydet is a set of self-adhesive masks for the glazed parts of a model, according to the name for the outer and the inner side. It is not a kit but an accessory for painting.

Scale1:32
Manufacturer Montex
Product EAN8591111000000

Responsibility details are not available.

3.96 €
3.27 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Montex masking set 1:32 Stearman PT-17 Kaydet

A set of self-adhesive masks for the glazed parts of a model of the Stearman PT-17 Kaydet trainer biplane in 1:32 scale. According to the name it covers the glazing from the outer and from the inner side. Masks for the national insignia are not part of this variant; it is a purely cockpit set. It is neither a model nor a part of one but an accessory for painting a kit, from the maker Montex.

The real subject

The Stearman PT-17 Kaydet was an American trainer biplane with a radial engine, a fixed landing gear and two cockpits one behind the other. It was built in large numbers as a basic training machine, and after being withdrawn hundreds of examples went into civil use, where they served in agriculture and at air displays. The cockpits are not covered by a continuous canopy, so the glazed areas are small, but every inaccurate paint edge is all the more prominent on them.

Usage tips

Wash the glazing first in lukewarm water with a drop of dish soap and let it dry freely. Lift the mask off the sheet with a sharp point or with tweezers, lay it dry in the right place and only then press the edges down with a soft tool. On small parts it pays to check the seating against the light. Go over the edges of the mask with a thin coat of clear or of the base color of the model, so that any gap is sealed and the paint does not creep under. Spray in thin coats and take the masks off while the paint is not yet fully cured, otherwise it peels at the edge. Apply the inner masks before you glue the parts onto the model.

Who the set is for

  • Builders of the Stearman PT-17 model in 1:32 scale
  • Modelers who want sharp edges without going over them by hand
  • Those looking for a canopy-only set without masks for the markings
  • Modelers painting with an airbrush who are bothered by paint creeping under tape

This is an accessory for painting, not a kit. The model, paints and glue are not included in the package. Before buying, check that the set matches the kit you are building.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. According to the name it is a cockpit set without masks for the markings. The variant with the insignia is a separate item from the maker.

No. The package contains only self-adhesive masks for painting. The model, paints and glue are not part of it.

Take it off shortly after drying, while the paint is still flexible, and pull it at an angle back over itself, not straight up.

The masks are cut to the shape of a particular model. The target kit is not stated here, so check that it matches beforehand.

Last seen

MontexMXSM321891:32

1:32 Stearman PT-17 Kaydet 2 canopy masks (interior and exterior canopy masks)

Montex 1:32 Stearman PT-17 Kaydet is a set of self-adhesive masks for the glazed parts of a model, according to the name for the outer and the inner side. It is not a kit but an accessory for painting.
In stock
3.96 €
MASTERAM320781:32

1:32 F6F Hellcat - early armament (.50 cal Browning barrels with drilled cooling jackets)

Turned metal barrels of .50 caliber Browning machine guns with drilled cooling jackets for the early Grumman F6F Hellcat in 1:32 scale from MASTER. They replace the plastic barrels in the leading edge of the wing.
In stock
10.36 €
Quinta StudioQD483251:48

1:48 F4U-5N Corsair 3D-Printed & coloured Interior on decal paper

Quinta Studio F4U-5N Corsair 1:48 - a 3D-printed color interior on decal paper that lifts the cockpit of a model to collector standard.
In stock
17.56 €
Mettalic DetailsMD48501:48

1:48 Sukhoi Su-27/Su-27UB/Su-30SM Air intake grilles

Metallic Details 1:48 Sukhoi Su-27/Su-27UB/Su-30SM air intake grilles is a photo-etched set of protective grilles for the air intakes of models of the Su-27 family in 1:48 scale. It is not a kit, but an accessory for a model.
In stock
9.96 €
Kits-WorldKWM1240051:24

1:24 Supermarine Spitfire Mk.Ia (designed to be used with Airfix A12001V kit)

Kits-World 1:24 Supermarine Spitfire Mk.Ia is a self-adhesive masking set for the canopy glazing and the wheels of large models of the early Spitfire Mk.Ia fighter in 1:24 scale.
In stock
8.76 €
MASTERAM721441:72

1:72 McDonnell-Douglas T-45 Goshawk - Pitot Tube & Angle Of Attack probe

1:72 McDonnell Douglas T-45 Goshawk pitot tube and angle of attack probe is a turned metal set from the brand MASTER for a small scale. These are detail parts for a kit, not an aircraft model.
In stock
3.40 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.