1:35 King Tiger & Jadtiger Exhaust Pipes

Replacement exhaust pipes for models of the King Tiger tank and the Jagdtiger tank destroyer in 1:35 scale. An accessory to a kit, the manufacturer's part number A.MIG-8093.

Scale1:35
Manufacturer AMMO of Mig Jimenez
Product EAN8591111000000

Responsibility details are not available.

5.16 € 3.88 €
3.21 € without VAT
−25 % You save 1.28 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The King Tiger, in German Königstiger, was a German heavy tank of the closing stage of the Second World War. On the same chassis, only lengthened, the Jagdtiger was built, a heavy tank destroyer with a fixed superstructure in place of a rotating turret. That is exactly why both vehicles share the layout of the rear end, including the pair of exhaust pipes that rise up the rear wall of the hull and are usually fitted with protective shrouds. On these vehicles the rear end is very clearly visible on a model, and the exhausts are the first thing the eye finds there.

What the set solves

An exhaust pipe is a hollow tube, and on an injection-molded part it tends to be blanked off or split by a seam along its whole length. The replacement part comes finished and saves the builder the work of drilling, filling and straightening. How many pieces the package holds and which kits it is cut for is given in the instructions supplied by the manufacturer; so always test the fit dry and level the surface on the rear wall of the hull as needed. The A.MIG part number prefix belongs to the AMMO brand.

  • 1:35 scale, replacement exhaust pipes for the rear of the vehicle
  • for models of the King Tiger and Jagdtiger types
  • it replaces the split injection-molded part from the kit
  • the material of the parts and their number are given in the manufacturer's instructions
  • it is advisable to test the fit dry

Building and painting tips

Cut the surplus material away with a sharp blade a little way from the part and sand the rest down carefully, so that the outline of the pipe is not damaged. Choose the glue according to the material of the part. Wash and degrease the parts before painting, otherwise the finish will not hold. On a real vehicle the exhaust quickly became covered in rust and scale, so it pays to set it apart from the surrounding paintwork: a dark base, rust shades applied irregularly and finally a dry brush along the edges.

Terms of supply

The kit, paints and glue are not part of the delivery, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Replacement exhaust pipes for models of the King Tiger and Jagdtiger in 1:35 scale. The number of parts and the material are given in the instructions supplied by the manufacturer.

The Jagdtiger was built on a lengthened King Tiger chassis, so both vehicles share the layout of the rear end, including the exhausts.

The name does not give the kit. So test the fit dry and level the surface on the rear wall of the hull as needed.

Set them apart from the surrounding paintwork. Lay down a dark base, apply rust shades irregularly and pull the edges out with a dry brush.

Last seen

1:35 King Tiger & Jadtiger Exhaust Pipes-25 %Stock ClearanceFavorite
AMMO of Mig JimenezA.MIG-80931:35

1:35 King Tiger & Jadtiger Exhaust Pipes

Replacement exhaust pipes for models of the King Tiger tank and the Jagdtiger tank destroyer in 1:35 scale. An accessory to a kit, the manufacturer's part number A.MIG-8093.
6 leftof 8
5.16 €3.88 € You save 1.28 €
Nunu ModelsPN240041:24

1:24 AUDI R8 LMS GT3 SPA 24 HOURS '15

1:24 Audi R8 LMS GT3 Spa 24 Hours 2015 is an injection-molded plastic kit of a GT3 racing car from NuNu Models. The model is supplied unassembled and unpainted.
In stock
39.96 €
Dead DesignNM480321:48

1:48 Messerschmitt Bf.109F-4 paint mask Zvezda

1:48 Messerschmitt Bf 109F-4, cockpit frame mask for the outer side of the glazing.
In stock
6.36 €
SX-ArtSXA351791:35

1:35 Paint mask M29 Weasel Arctic/Antarctic Exped.

An SX-Art paint mask for the model of the M29 Weasel tracked carrier in polar configuration, 1:35 scale. Intended for applying the color scheme with an airbrush.
In stock
7.16 €
EduardEX11511:48

1:48 Curtiss Kittyhawk Mk.IV - TFace Mask Set for Eduard

A set of TFace masks for the glazing of a Curtiss Kittyhawk Mk.IV model in 1:48 scale, plotter-cut from kabuki paper.
In stock
11.80 €
1:35 1st Fallschirmjager Division (Holland 1940)-25 %Stock ClearanceFavorite
DragonDR62761:35

1:35 1st Fallschirmjager Division (Holland 1940)

Dragon 1:35 1st Fallschirmjager Division (Holland 1940) is a plastic set of four figures of German paratroopers in 1:35 scale. It is supplied unassembled and unpainted.
9 leftof 12
22.36 €16.76 € You save 5.60 €
HaulerHLX481351:48

1:48 KV-1/KV-2 fenders (TAMIYA)

Photo-etched fenders for the KV-1 and KV-2 1:48 from the Czech maker Hauler replace the thick plastic fenders with thin brass sheet. An accessory for a model, not a kit. The set is intended for the Tamiya kit.
In stock
22.76 €
Yamamoto Model PartsYMP35151:35

1:35 Schmalturm V2 "What If" Turret for E-50 & E-75 Trumpeter

Yamamoto Model Parts Schmalturm V2 1:35 is a resin replacement turret for so-called what if conversions of models of the E-50 and E-75 chassis. It is not a vehicle kit.
In stock
31.96 €
Freedom Model KitsFMK1480011:48

1:48 ROCAF Modern flight crew Vol-01 for AT-3

Freedom Model Kits 1:48 ROCAF Modern flight crew Vol-01 is a set of figures of a modern flight crew of the Republic of China Air Force, intended to complete a model of the AT-3 trainer in 1:48 scale.
In stock
13.96 €
ETA dioramaETA4551:35

1:35 U.S. Meal, Ready-to-Eat

U.S. Meal, Ready-to-Eat 1:35 is a set of printed paper miniatures of American MRE field ration packaging for dioramas.
In stock
3.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.