1:35 Paint mask for T-62 is an SX-Art masking set for painting a model of the T-62 medium tank in 1:35 scale. Target kit: Zvezda.
Responsibility details are not available.
A masking set from the SX-Art brand intended for painting a plastic model of the T-62 medium tank in 1:35 scale. It is not a kit and not a part of a model, but an aid for painting that saves time when covering small areas such as vision slits, optics and headlights. The dimensions and shapes are based on the Zvezda kit.
The T-62 was a medium tank following on from the T-54 and T-55 line, from which it differs most conspicuously in its 115 mm smoothbore gun and its longer, more elongated hull. The turret has a cast hemispherical shape and a prominent shell ejector on top. It is precisely the round turret and the number of small vision slits that make painting the model a lengthy job: the edges are hard to line in with a brush and tape puckers on a curved surface.
Use the set after the base color has been sprayed and has dried. Transfer the masking part with tweezers, seat it and press the edge down, so that neither paint nor wash runs under it. Spray the paint in thin layers; with vehicles a modulation procedure, in which the upper surfaces are lightened in several steps, proves itself. Lift the mask off shortly after the paint has set. On a tank model you will appreciate masking above all before weathering is applied, because covered optics and lights stay readable even under a layer of dust pigments.
It is an accessory to a model, not the model itself. The kit and paints are not included in the package. Before you buy, check that the set matches your kit.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!