1:35 Pz.Kpfw.IV ausf.F Sd.Kfz.161 - Tamiya

The masking set for the road wheels of the Pz.Kpfw.IV Ausf.F tank in 1:35 scale is cut for the kit from Tamiya and covers the rubber tire bands of both the wheels and the return rollers.

Scale1:35
Manufacturer Quickwheel
Product EAN8591111000000

Responsibility details are not available.

7.56 €
6.25 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Pz.Kpfw.IV Ausf.F road wheel masks in 1:35 scale

A pre-cut masking set for painting the running gear of the Pz.Kpfw.IV medium tank in the Ausf.F version. It covers the rubber parts of the wheels, so you spray the rims in the base color of the vehicle and the tire bands stay in a dark shade. The set is cut for the kit of this tank from Tamiya.

What makes the running gear of the Pz.Kpfw.IV special

The Pz.Kpfw.IV does not have interleaved wheels like the later German types, but eight small road wheels on each side, paired into four bogies sprung on leaf springs. Four return rollers run above them. That is a fundamental difference from the Panther or the Tiger: the wheels do not overlap and are easily accessible, but they are small, there are many of them and they are packed tightly side by side. A brush reaches the tire band of a small wheel less easily than the large wheel of a T-34, and eight identical rings per side have to look the same, or the mismatch is immediately visible in the view from the side. Do not forget the return rollers either, on which the rubber tire band is painted as well.

When a mask will not catch on a small wheel

Small masks are better transferred with the point of a sharp scalpel or with tweezers than with fingers. Lay a mask on dry first, check that it is concentric with the rim and only then press it down with a blunt toothpick all the way around. Apply the paint in two or three very thin coats; one heavy coat accumulates at the edge of the mask on small wheels and leaves a visible ridge once it is lifted. Paint the wheels and the rollers away from the hull, while they can still be turned. Small imperfections on the tire band border can be leveled with a brush without worry on a running gear, and in the end dust and mud will unify them anyway.

Who the set is for

  • Builders of German Second World War equipment in 1:35 scale
  • Modelers who want eight wheels per side to look uniform
  • Those who reach small tire bands with a brush only with difficulty
  • Anyone wanting to shorten the work on the most tedious part of a build

Paints, glue and the kit are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

There are eight small road wheels in four bogies on each side and four return rollers above them. Tire bands are painted on both groups.

It is cut for the kit from Tamiya. The wheels of other kits differ in diameter and center shape, so check the match beforehand.

Transfer them with the point of a scalpel or with tweezers, lay them on dry first, check the concentricity and then press them down with a blunt toothpick all the way around.

You laid too heavy a coat on at once. On small wheels spray two or three very thin coats and no ridge will form.

Last seen

QuickwheelQW-2621:35

1:35 Pz.Kpfw.IV ausf.F Sd.Kfz.161 - Tamiya

The masking set for the road wheels of the Pz.Kpfw.IV Ausf.F tank in 1:35 scale is cut for the kit from Tamiya and covers the rubber tire bands of both the wheels and the return rollers.
In stock
7.56 €
MASTERAM1440041:144

1:144 Supermarine Spitfire E wing late (rounded fairings) - Hispano 20mm & Browning .50cal in fairings

Turned metal armament barrels for the Supermarine Spitfire with the E wing – late version (rounded fairings) in 1:144 scale from MASTER. Accurate replacement parts, not a kit.
In stock
4.36 €
Aires/QuickboostQB323491:32

1:32 Messerschmitt Bf-109 G-2 / G-4 / G-6 - Air Intake (for Hasegawa Kits)

A resin air intake in 1:32 for the Messerschmitt Bf-109 G-2 / G-4 / G-6 from Quickboost. The accurate casting of the intake replaces the simplified plastic part.
In stock
4.76 €
Star DecalsSD35-9611:35

1:35 M19 Diamond tank transporter # 3. British trucks in NW Europe.

Star Decals 1:35 M19 Diamond tank transporter is a set of markings for the British tank transporters in Northwest Europe, the third in the range devoted to this combination.
In stock
8.36 €
SX-ArtSXA350541:35

1:35 GAZ TIGER-M Tinting film I. (ZVE)

SX-Art 1:35 GAZ Tiger-M – tinting film I. is a pre-cut self-adhesive tinting film for the glazing of the modernized version of the Tiger armored car. An accessory for a kit, not a model.
In stock
3.56 €
Mr.PaintMRP418

IJAAF #7 Ohryoku Nana Go Shoku (Yellow Green #7)

IJAAF No. 7 Ohryoku Nana Go Shoku (Yellow Green No. 7) is a lacquer airbrush shade from Mr.Paint reproducing the yellow-green protective color of the Imperial Japanese Army Air Force.
In stock
5.96 €
Artwox ModelAW500111:450

1:450 USS Missouri Wooden Deck for Hasegawa kit #40114

An accessory for a small model of the famous American battleship USS Missouri from the Hasegawa 40114 kit, 1:450 scale.
In stock
32.76 €
TrumpeterTR010251:35

1:35 Russian 9P113 TEL w/9M21 Rocket of 9K52 Luna-M Short-range artillery

The 9P113 TEL with the 9M21 rocket (the 9K52 Luna-M system) is an injection-molded plastic model of the Soviet launch vehicle with its tactical rocket in 1:35 scale from Trumpeter. The model is supplied unassembled and unpainted.
In stock
73.96 €
OmaskOMK541021:48

1:48 PZL M18 Dromader double sided mask and door foam plugs (for IBG)

1:48 PZL M18 Dromader, double-sided mask and door foam plugs (Omask, for IBG) is a masking set for the PZL M18 Dromader kit from IBG. It is not a model but a painting accessory, and it needs the base kit.
In stock
7.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.