1:35 Russian Long-Range Rocket Launcher 9A52-2 SMERCH

1:35 Russian Long-Range Rocket Launcher 9A52-2 SMERCH

41.96 €
Add to Cart

1:35 Russian Long-Range Rocket Launcher 9A52-2 SMERCH

A photo-etched set for a model of the Russian 9A52-2 Smerch large-caliber rocket launcher in 1:35 scale from E.T. Model. An accessory for refining the detail of a plastic model, not a kit in its own right.

Scale1:35
Manufacturer E.T. Model
Product EAN8591111717830

Responsibility details are not available.

41.96 €
34.68 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

9A52-2 Smerch rocket launcher photo-etched set, 1:35 (E.T. Model)

A photo-etched metal set intended for refining the detail of a plastic model of the Russian 9A52-2 Smerch large-caliber rocket launcher in 1:35 scale. It is not a kit of the vehicle, but an aftermarket accessory. The photo-etched parts replace plastic items wherever injection-molded plastic is unconvincing for its thickness; on this type these are above all the grilles, the covers, the platforms and the access steps, the loops, the clamps, the guards and the fine equipment brackets on the chassis and on the launcher. The scope of the package follows the manufacturer's instructions.

The real subject

The 9A52-2 Smerch is a Russian large-caliber rocket launcher on the chassis of a heavy off-road truck. The launcher carries a bundle of guide tubes for 300 mm rockets and is intended for area fire at long range, that is for destroying concentrated vehicles, firing positions and rear-area targets. The system is rounded out by a separate reloading truck with a crane, without which refilling the pack would be extraordinarily slow. The combination of a large wheeled chassis and a massive pack of tubes makes the subject a striking modeling object.

Tips for working with photo-etched parts

Cut the parts out with a sharp scalpel on a hard surface, and never break them out. Make the folds along the marked score lines, best in a photo-etch bender. Fit the steps, the platforms and the guards only once the main plastic parts are in place, otherwise you risk bending them during handling. They are glued with thin cyanoacrylate, and on larger parts a slow-setting epoxy gives time for exact positioning. Degrease the metal before painting and lay down a primer. On wheeled vehicles it proves useful to weather from the bottom upwards, that is mud and dust on the chassis and the wheels first, and only then finer effects on the superstructure.

Who the set is for

  • Builders of modern Russian rocket and artillery vehicles
  • Modelers who are bothered by coarse platforms, steps and guards on a plastic model
  • More experienced modelers with experience of bending and gluing metal
  • Display and contest builds, where a large model is seen close up

This is an accessory photo-etched set. The base model, glue and paints are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

A Russian large-caliber rocket launcher on the chassis of a heavy off-road truck, intended for area fire with 300 mm rockets at long range.

No. The package holds photo-etched metal parts only. The plastic model has to be obtained separately.

Only once the main plastic parts are in place, ideally toward the end of the build. Otherwise you will easily bend them while handling the model.

Only after degreasing and spraying with a primer. Without an undercoat the paint rubs off during further handling.

Last seen

E.T. ModelE35-2501:35

1:35 Russian Long-Range Rocket Launcher 9A52-2 SMERCH

A photo-etched set for a model of the Russian 9A52-2 Smerch large-caliber rocket launcher in 1:35 scale from E.T. Model. An accessory for refining the detail of a plastic model, not a kit in its own right.
In stock
41.96 €
Copper State Models CSMF32-0101:32

1:32 Gotha Bomber German Crew Member N.2

Gotha Bomber German Crew Member N.2 is a resin figure of a German crew member of the Gotha bomber of the First World War in 1:32 from Copper State Models. It is supplied unassembled and unpainted.
In stock
15.96 €
ArmoryAR143101:144

1:144 Yakovlev Yak-1b (2 kits in the box)

The Yakovlev Yak-1b 1:144 from Armory is a plastic kit of a Soviet fighter of the Second World War - the package contains two models at once.
In stock
11.96 €
MAiMMAIM35H00581:35

1:35 Sad/Anger Faces - Character Head Set (7 Heads)

MAiM 1:35, a set of seven resin portrait heads with sad and angry expressions. Replacement heads for figures in 1:35 scale.
In stock
13.16 €
Mantis MiniaturesMAN350131:35

1:35 U.S. Infantryman - Ardennes 1944

U.S. Infantryman - Ardennes 1944 in 1:35 scale is a resin figure of an American infantryman from the Polish brand Mantis Miniatures. To be assembled and painted.
In stock
13.96 €
Hobby BossHB817261:48

1:48 F-84 F Thunderstreak

Republic F-84F Thunderstreak is an injection-molded plastic kit of the American jet fighter-bomber in 1:48 scale from Hobby Boss.
In stock
29.96 €
SBS ModelSBS480361:48

1:48 Kfz.385 wheel set (late 8-bolt type)

The Kfz.385 wheel set (the late eight-bolt type) is a resin detail set in 1:48 scale from SBS Model for a model of this German military vehicle.
In stock
15.16 €
ItaleriIT60161:72

1:72 French Imperial General Staff

French Imperial General Staff from Italeri is a plastic set of unassembled figures in 1:72 scale. It depicts the French imperial staff of the Napoleonic period.
In stock
8.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.