The 1:48 CH-53 GS/G BASIC kabuki masks are a set of pre-cut masking stencils of kabuki tape for a model of the heavy CH-53 GS/G helicopter in 1:48. It is not a kit.
Responsibility details are not available.
This is a modeling accessory, not a model of the helicopter: a set of pre-cut masks of kabuki tape for building the heavy CH-53 transport helicopter in the G and GS versions in 1:48. Kabuki tape is thin and pliable, it holds even on the curved surfaces of the glazing and leaves no adhesive behind when removed. The set carries the BASIC level, that is the basic extent; the manufacturer New Ware also offers higher levels for the same machine and a separate set for the rotor blades.
The Sikorsky CH-53 is a heavy transport helicopter with a large cargo compartment, a folding tail section and external tanks on the sides of the fuselage. The CH-53G version and its upgraded form the CH-53GS serve in the German forces to carry troops and materiel; the GS is the later state with added equipment. For a modeler the key point is the extensive glazing of the flight deck and the side windows of the cargo compartment, which is exactly where a masking set pays off most.
Degrease the surfaces before sticking the masks down, press the mask down with a toothpick all the way round, and only then spray. Apply the paint in thin coats, as a heavy coat tears at the edge. Take the masks off while the paint has only just dried, with tweezers and at a sharp angle. On a helicopter with this many windows it pays to work systematically from the cockpit rearward and tick off what is done as you go.
This is an accessory, not a model. The kit, paints and glue are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!