1:48 de Havilland Mosquito in WWII USAAF service

1:48 de Havilland Mosquito in WWII USAAF service

15.96 €
Add to Cart

1:48 de Havilland Mosquito in WWII USAAF service

de Havilland Mosquito in USAAF service is a Caracal Models set of waterslide decals in 1:48 scale devoted to the British Mosquitos used by the US Army Air Forces in the Second World War.

Scale1:48
Manufacturer Caracal Models
Product EAN8591111000000

Responsibility details are not available.

15.96 €
13.19 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Mosquito in USAAF service - 1:48 decals from Caracal Models

This is a set of decals in 1:48 scale, not a kit. The theme is a less usual chapter of the type: the British de Havilland Mosquito operated by American units. To use it you need a matching model of the Mosquito in the same scale; neither that nor paints are included in the package. The versions of the Mosquito differ markedly, so compare the contents of the sheet with the source material for the machine you are building.

The real subject

The de Havilland Mosquito was a British twin-engine aircraft with a wooden airframe, which gave it low weight and high speed. It came about in many forms - bomber, fighter, night fighter and reconnaissance. The American units operating from Britain made use above all of the photo-reconnaissance and weather machines, because the Mosquito could fly high and fast and needed no escort. The markings of these aircraft combined American national insignia with the British origin of the airframe, which makes them a visually untypical and, among modelers, a rewarding theme.

Application tips - watch the age of the sheet

Decals age. The carrier film grows brittle over the years and breaks while being soaked, and on older sheets it sometimes turns yellow as well. Before you use the set, look the sheet over against the light: a network of fine cracks in the film is a warning. The remedy is simple and reliable - spray the whole sheet with a thin coat of clear varnish from a can, let it dry for a day and only then cut the decals out. The varnish makes a new continuous carrier and the decal will not fall apart. In that case cut right up to the motif, because a varnished sheet now forms one whole. Yellowing of the film usually goes away after a few days in daylight.

Who the set is for

  • For builders of the Mosquito in 1:48 scale
  • For modelers looking for less usual markings instead of the standard British ones
  • For collectors of decals for the US Army Air Forces in Europe
  • For the slightly more advanced and above

It is an accessory, not a model. The kit, paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The Mosquito has many forms, which differ in the nose and in the armament. The particular version is given on the packaging of the sheet; compare it before buying.

It is not. It is purely decals. The Mosquito kit in 1:48 scale and the paints have to be obtained separately.

Spray it with a thin coat of clear varnish and let it dry for a day; the film will then hold together. The yellowing usually goes away after a few days in daylight.

The extent of the sheet is given on the packaging. If you need complete stenciling, count on a separate set possibly being necessary.

Last seen

Caracal ModelsCAD481831:48

1:48 de Havilland Mosquito in WWII USAAF service

de Havilland Mosquito in USAAF service is a Caracal Models set of waterslide decals in 1:48 scale devoted to the British Mosquitos used by the US Army Air Forces in the Second World War.
In stock
15.96 €
Red Fox StudioRFSQS-321381:32

1:32 Fairchild A-10 N/AW Thunderbolt II - Instrument Panels (for Trumpeter kit)

1:32 Fairchild A-10 N/AW Thunderbolt II - Instrument Panels is a color interior accessory from Red Fox Studio for the two-seat night and all-weather version of the ground-attack aircraft.
In stock
44.36 €
AFV ClubAC350251:35

1:35 Royal engineers modern pipe fascine for anti tank ditches

An accessory in 1:35 scale: a bundle of pipes with which British engineers fill in antitank ditches. Intended for a model of an engineer vehicle or for a diorama.
In stock
8.76 €
Dead DesignNM480071:48

1:48 F-86D Sabre Dog canopy paint mask Monogram and Revell

1:48 F-86D Sabre Dog, canopy mask for the domed hinged canopy of the American interceptor with a radar in the nose.
In stock
7.56 €
Artwox ModelAW201031:700

1:700 Japanese Navy Battleship Mutsu-Full hul (For Fujimi 401034)

A wooden deck in 1:700 scale for a model of the Japanese battleship Mutsu in the full hull version, cut for the Fujimi 401034 kit.
In stock
14.36 €
Voyager ModelVBS05541:35

1:35 WWII German Panzer IV Ausf F2. L/42 75mm Barrel(GP)

A turned replacement barrel for the 75 mm gun of a model of the German Panzer IV Ausf. F2 tank in 1:35 scale.
In stock
17.96 €
Quinta StudioQT720311:72

1:72 Kamov Ka-52 / Ка-52 М - Exhaust Device (for Dream Model and Quinta Kits)

Quinta Studio 1:72 Kamov Ka-52 Exhaust Device is a 3D-printed resin set of the exhaust system for faithfully completing Ka-52 helicopter models. The parts are shaped for the Dream Model and Quinta kits.
In stock
5.16 €
Aires/AerobonusAER4800901:48

1:48 U.S.A.F. Maintenance crew - Farm Gate operation Vietnam War

A figure accessory in 1:48 scale on the subject of US Air Force ground personnel from the deployment in Southeast Asia under the designation Farm Gate.
In stock
6 €
KajikaKM710021:700

1:700 kovové hlavně 36 cm pro japonský bitevní křižník IJN Kongo

Kajika 1:700 36 cm metal barrels for IJN Kongo is a set of turned metal barrels for the main guns of a model of the Japanese battlecruiser.
In stock
10.36 €
DSPIAEDS56090

#600 Grit Adhesive Sandpaper 90mm x 22mm for AT-MA - 30 pcs

DSPIAE self-adhesive abrasive paper of 600 grit, 90 x 22 mm, 30 pieces is a consumable refill cut to fit the sanding tools of the AT-MA range.
In stock
5.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.