1:700 HMS Kelly 1940 Paintmask FlyHawk FH 1119 / FH 1119S

1:700 HMS Kelly 1940 Paintmask FlyHawk FH 1119 / FH 1119S

9.16 €
Add to Cart

1:700 HMS Kelly 1940 Paintmask FlyHawk FH 1119 / FH 1119S

HMS Kelly 1940 painting masks 1:700 are pre-cut masks for spraying the camouflage scheme of the destroyer as in 1940. It is not a kit or a set of decals.

Scale1:700
Manufacturer Flyhawk
Product EAN8591111751063

Responsibility details are not available.

9.16 €
7.57 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

HMS Kelly 1940 painting masks, 1:700 (Flyhawk)

A set of pre-cut painting masks for spraying the camouflage scheme of the British destroyer HMS Kelly as in 1940 onto a model in 1:700 scale. It is not a kit or decals. The masks are there so that the complicated boundary between the color fields can be sprayed sharply, repeatably and without the laborious cutting of tape, which at this scale means hours of work with an uncertain result.

Why masks instead of tape or decals

Camouflage schemes of ships have broken shapes that have to be carried symmetrically onto both sides and tied into the superstructures. Hand-cut tape is hard to copy from one side to the other in 1:700 scale, and a small deviation shows on the finished model. A pre-cut mask holds the shape and saves time. Compared with a decal, a sprayed scheme has the advantage that no film or glossy edge is left on the surface and the paint looks uniform on the decks as well as the sides.

Usage tips

Apply the masks over a perfectly dried base coat, not over fresh paint, otherwise the base will come away with them when they are peeled off. Press the edges of the mask down carefully with a toothpick or a blunt tool, as that is exactly where the paint creeps under. Spray in thin coats and, as far as possible, perpendicular to the edge of the mask rather than at an angle under it. Work from the lighter shade to the darker one, so that the less opaque color does not have to fight a dark base. Remove the mask shortly after the paint has dried; after a longer time the adhesive settles and the peeling tends to be rough. Carefully remove any adhesive residue and unify the surface with a final matte clear coat.

Who the set is for

  • For modelers of warships in 1:700 scale.
  • For builders who spray with an airbrush and want sharp edges to the camouflage.
  • For those who want to avoid the laborious cutting of tape.
  • For display and competition builds with the emphasis on a clean finish.

The package contains only the painting masks. The model of the ship, the paints and the varnish are not included. The masks are cut to the shape of one specific kit in 1:700 scale and need not fit a model from another manufacturer.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. The box contains only the painting masks. The model, the paints and the varnish have to be obtained separately.

The masks are cut to the shape of one specific kit in 1:700 scale from the same manufacturer. On a model from another brand the shapes of the parts differ and the mask need not fit.

Apply the masks over a perfectly dried finish, press the edges down carefully with a blunt tool and spray thin coats perpendicular to the edge, not at an angle under it.

Shortly after the paint has dried. The longer a mask stays on the model, the more firmly the adhesive holds and the greater the risk of damaging the finish.

Last seen

FlyhawkFH7100671:700

1:700 HMS Kelly 1940 Paintmask FlyHawk FH 1119 / FH 1119S

HMS Kelly 1940 painting masks 1:700 are pre-cut masks for spraying the camouflage scheme of the destroyer as in 1940. It is not a kit or a set of decals.
In stock
9.16 €
Kits-WorldKW3D14810871:48

1:48 Mikoyan-Gurevich MiG-21 PF - Cockpit Interior 3D Decals - Aqua Color (for Eduard 8236 kit)

Decals for the cockpit interior of the MiG-21 PF interceptor in 1:48 scale in a light blue-green shade, intended for the Eduard kit.
In stock
13.16 €
QMTQMTM720191:72

1:72 Focke-Wulf Ta-152H-0/H-1 wheel bay paint masks

A set of masks for covering and spraying the wheel bays of the Ta 152H-0 and H-1 aircraft in 1:72 scale.
In stock
6.76 €
Dead DesignVM721901:72

1:72 G4M2 Betty Model 22/24 National Insignias And Markings (Hasegawa)

Masks for the national insignia and markings for the Mitsubishi G4M2 Betty Model 22/24 in 1:72 scale from the Dead Design brand. The template defines the shape of the hinomaru, which is then sprayed in paint directly into the finish. Target kit: Hasegawa.
In stock
7.16 €
Voyager ModelPR350851:35

1:35 WWII German Kubelwagen Type 82 Africa Troop Special Balloon Tires Patten 2 (GP)

Voyager Model 1:35 balloon tires for the Kübelwagen Type 82 Africa, pattern 2 is a resin set of wide desert wheels for models of the German Kübelwagen.
In stock
8.76 €
Kits-WorldKWM3210061:32

1:32 P-51D-5NA Mustang wheels and canopy (outside) and windows paint mask (for Revell 3944 kit)

Films for the bubble canopy, the armored windscreen and the wheels of the P-51D-5NA Mustang fighter in 1:32 scale, cut to the Revell parts.
In stock
8.76 €
MontexMXMM321741:32

1:32 Cessna L-19/O-1 Bird Dog 2 canopy masks (inside and outside canopy frame mask) + insignia masks

Montex 1:32 Cessna L-19 / O-1 Bird Dog is a masking set for both sides of the glazing framing, with masks for national insignia added. An accessory for a kit, not a model.
In stock
8.76 €
MASTERAM321121:32

1:32 Northrop T-38 Talon / F-5B / RF-5A, E, S - Pitot Tube and 20mm gun barrels

A turned brass Pitot tube and 20 mm cannon barrels for models of the T-38 Talon, the F-5B and the RF-5A/E/S in 1:32 scale. An accurate metal accessory.
In stock
7 €
Voyager ModelPEA4351:35

1:35 WWII US Army M46 Patton Tank side skirts and stowager bins(For TAKOM 2117)

A photo-etched set for a model of the American M46 Patton medium tank in 1:35 scale with side covers over the running gear and stowage boxes. Prepared for the Takom 2117 kit.
In stock
15.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.