LAST CHANCE! 20% OFF Ends Tonight!

1:700 Neo Equipment parts for IJN Ships (III)

A supplementary set of armament and equipment parts for Japanese ships in 1:700 scale, the third part of the range from the manufacturer Pit-Road. It is not a ship model but a detail set for kits.

Scale1:700
Manufacturer Pit-Road
Product EAN8591111000000

Responsibility details are not available.

19.96 €
16.50 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

A set of armament and equipment parts for Japanese ships 1:700, the third part of the range

A supplementary set of small parts in 1:700 scale from the Japanese manufacturer Pit-Road. It is not a ship kit but a set that a modeler buys for a model already obtained, in order to replace simplified parts of the armament and the deck equipment. The range is divided into several parts and this item is the third in order; the individual parts differ in their make-up, so they can be combined.

What the set is for

In ship kits the armament and equipment tend to be molded in one piece with the superstructure or the deck, which is simple to produce but the result reads softly and the shapes are too thick for the scale. Separately produced parts can be molded more finely and with crisper detail, so once they are used the finished model looks noticeably better in exactly the places the eye goes to first. The set also suits cases where you are building an older tooling that lacks some of the equipment. What is specifically in this package is stated on the box.

Building and painting tips

A practical approach is to paint the whole set while still on the sprue and only then cut the parts off. You save yourself holding miniature components in tweezers and the paint reaches places you could not get to once they are glued on. Run the cut a little away from the part and clean the sprue nub up with a fine file. When gluing, do not put the glue on the model but a small drop on a surface and dip the tip of the part into it. Before using the set, check on a photograph of the particular ship where each item of equipment belongs, because the arrangement differed from ship to ship and from year to year.

Who the set is for

  • Modelers building Japanese ships in 1:700 scale
  • Those who want to replace coarsely molded armament from a kit
  • More experienced builders used to working with small parts
  • Collectors who build a series of ships to a uniform level of detail

The set is an accessory for a kit, not a model in its own right. It is supplied unpainted; glue and paints are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Yes. The set contains supplementary parts only; the ship model itself has to be bought separately.

Yes, the individual numbers in the range differ in their make-up. The specific contents of this package are stated on the box.

In 1:700 scale they are often parts smaller than a few millimeters. The work cannot be done without tweezers, a sharp knife and good light.

We recommend painting them while still on the sprue and, once glued on, only touching in the joints and unifying the shade with the model.

Last seen

Pit-RoadNE-031:700

1:700 Neo Equipment parts for IJN Ships (III)

A supplementary set of armament and equipment parts for Japanese ships in 1:700 scale, the third part of the range from the manufacturer Pit-Road. It is not a ship model but a detail set for kits.
In stock
19.96 €
Hobby DesignHD02-02451:18

1:18 Aston Martin DB9 Detail Parts (Welly)

Aston Martin DB9, detail parts 1:18 from Hobby Design will supplement a large metal model of the elegant GT with fine points corresponding to the scale.
In stock
21.56 €
QuickwheelQWX-511:35

1:35 BMP-3 - Corrected Road Wheels 12 Wheels & QW Mask (for Trumpeter Kits)

QuickWheel 1:35 BMP-3 Corrected Road Wheels (12 Wheels and Mask) is a resin set making the running gear of models of the infantry fighting vehicle more accurate.
In stock
25.56 €
AoshimaAO054331:24

1:24 Nissan KHGC211 Skyline HT2000 Turbo GT-E.S '81

The Aoshima 1:24 plastic kit of the Nissan Skyline HT 2000 Turbo GT-E.S of 1981 captures the hardtop coupe of the C211 generation, one of the icons of the Japanese car scene at the turn of the 1970s and 1980s.
In stock
23.96 €
AberABR35L1551:35

1:35 Barrels for British WWI Tank Mark IV – Male

A set of turned metal barrels for the British First World War Mark IV Male tank in 1:35 scale from the firm Aber. A detail accessory, not a kit in its own right.
In stock
14.20 €
Artwox ModelBM10018A1:350

1:350 German Z-32 Destroyer Wooden Deck w/Masking Sheet (for Dragon kit 1065)

Wooden deck with masking film 1:350 for the German destroyer Z-32 from Artwox Model is a self-adhesive veneer with pre-printed plank laying that takes over from the engraved plastic of the original deck.
In stock
11.96 €
ZebranomodelZE1002861:100

1:100 Carro Veloce CV.33 I Series Italian Tankette

1:100 Carro Veloce CV.33 I Series is a resin model of the Italian tankette in the form of the first production series.
In stock
11.56 €
SX-ArtSXA480241:48

1:48 Supermarine Walrus Mk.I Painting mask (AIRF)

1:48 Supermarine Walrus Mk.I – masking stencils for spraying is a set of self-adhesive stencils that define the camouflage shapes for airbrushing on a model of the British amphibian biplane. These are not canopy masks.
In stock
3.56 €
J´s WorkPPA51321:72

Airbrush CAMO-MASK for 1/72 Su-35 Flanker Camouflage Scheme 2

Airbrush CAMO-MASK Su-35 Flanker (scheme 2) (1:72, J's Work) - a set of masking stencils for spraying camouflage, not a model.
In stock
6.76 €
TrumpeterTR066061:48

1:48 Wyvern S.4 Photo Etched Parts Set

Trumpeter 1:48 Wyvern S.4 — photo-etched parts set is a photo-etch detail set for the kit of the British Westland Wyvern S.4. It is not a model but an accessory in 1:48 scale for experienced modelers.
In stock
27.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.