Paper masks for the landing gear bays of a Wildcat model in 1:72 scale, according to the product name for Arma Hobby kits.
Responsibility details are not available.
The Wildcat was an American carrier fighter of the Second World War with a radial engine. It served on carrier decks through most of the war, and its distinguishing feature was landing gear that retracted into the sides of the fuselage, which on earlier machines the pilot cranked up by hand. That is exactly why the bays are clearly visible on a model. The masks are intended for 1:72 scale and, according to the product name, aim at Arma Hobby kits.
Paper masks for the landing gear bays. They are fitted into the open bays and close them for the time of spraying, so that neither paint nor mist drifting off the surrounding areas can get inside. The paper can be pressed against the outline of the bay, and once the coat is finished it is taken out of the model again.
The mask belongs in the model before spraying, that is before the primer and the top color come into play. Finish and paint the bays first, therefore, and only then close them up. Check that the mask beds against the edge all the way round: paint will pass inside through a narrow gap, and an oversprayed bay is difficult to put right. Once the last coat has dried, lift the mask out with tweezers so that the edge of the bay does not suffer.
The kit, paints and glue are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
