1:72 Pitot tubes & 20mm cannon barrels for IJN interceptor SHIDENKAI (N1K2-J George)

1:72 Pitot tubes & 20mm cannon barrels for IJN interceptor SHIDENKAI (N1K2-J George)

17.56 €
Add to Cart

1:72 Pitot tubes & 20mm cannon barrels for IJN interceptor SHIDENKAI (N1K2-J George)

Metal 20 mm cannon barrels and pitot tubes in 1:72 from FineMolds for a model of the Japanese N1K2-J Shiden-Kai interceptor. It is a detail accessory, not an aircraft kit.

Scale1:72
Manufacturer FineMolds
Product EAN8591111000000

Responsibility details are not available.

17.56 €
14.51 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Metal barrels and pitot tubes in 1:72 for the N1K2-J Shiden-Kai (FineMolds)

A set of turned metal parts meant to replace the plastic 20 mm cannon barrels and the pitot tube on a model of the Japanese N1K2-J Shiden-Kai interceptor fighter in 1:72 scale. This is not an aircraft kit but an accessory for a model you already have under way. Metal holds a thin wall at the muzzle and a precise cylindrical profile that injection-molded plastic cannot achieve in so small a scale.

The real subject

The N1K2-J Shiden-Kai was a land-based fighter of the Imperial Japanese Navy Air Service from the end of the Second World War. It arose by reworking an earlier float-equipped type into a conventional aircraft with an undercarriage and a low-set wing; the Allied code name for it was George. The main armament consisted of 20 mm cannons built into the wing, whose barrels project from the leading edge and which, in a small scale, are among the most closely watched details. The pitot tube on the wing is another small item that tends to be disproportionately thick in plastic and breaks off easily as the model is handled.

Fitting and painting tips

Cut the plastic projection off with a sharp knife or a fine saw and carefully widen the seating hole with a hand drill so that the metal part seats without play and aligns itself on the axis. Degrease the metal with alcohol before gluing, otherwise neither glue nor paint will hold on it. Glue with cyanoacrylate glue in a minimal amount applied with a pin. It is sensible to fit the barrels and the tube only after the camouflage has been sprayed and has dried, so that they are not bent during masking. The metal surface then only needs unifying with a dark shade, or can be left in its natural metal sheen.

Who the set is for

  • modelers building Japanese fighters in 1:72 scale
  • those who want to replace coarse plastic barrels with precise turned metal
  • builders whose thin plastic projections keep breaking
  • display models viewed from close up

The accessory is supplied unpainted and without the base model. Glue, paints and the kit are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is a set of metal replacement parts for a model you obtain separately.

A metal barrel has a thin wall at the muzzle and a precise profile, it does not deform while being sanded and it does not break during handling.

Cut the plastic projection off, widen the hole with a drill, degrease the metal with alcohol and glue it on with a small amount of cyanoacrylate glue.

Yes, we recommend degreasing and a base coat meant for metal, otherwise the paint holds badly.

Last seen

FineMoldsAA371:72

1:72 Pitot tubes & 20mm cannon barrels for IJN interceptor SHIDENKAI (N1K2-J George)

Metal 20 mm cannon barrels and pitot tubes in 1:72 from FineMolds for a model of the Japanese N1K2-J Shiden-Kai interceptor. It is a detail accessory, not an aircraft kit.
In stock
17.56 €
MASTERAM721451:72

1:72 Republic P-47D Thunderbolt - Browning .50 blast tubes, gunsight and Pitot Tube

MASTER 1:72 Republic P-47D Thunderbolt details set is a set of turned metal (brass) machine gun barrels, a gunsight and a pitot tube for a 1:72 P-47D model.
In stock
7.96 €
AberABRA720101:72

1:72 Armament for British fighter Hurricane Mk.II; Hispano 20mm x 4

Aber 1:72 – armament for the British Hurricane Mk.II fighter, four turned 20 mm Hispano cannons replaces the plastic barrels of the wing armament.
In stock
5.16 €
AberABRA720021:72

1:72 C wing armament for British fighter Spitfire Mk.VIII to XVI

Aber – C wing armament for the Spitfire Mk.VIII to XVI (1:72) is a fine add-on set with turned brass barrels for models of British fighters in 1:72 scale.
In stock
6.36 €
1:48 Boeing B-17F Flying Fortress-25 %Stock ClearanceFavorite
EduardFE11801:48

1:48 Boeing B-17F Flying Fortress

Eduard 1:48 Boeing B-17F Flying Fortress is a photo-etched set for making the details of a model of the American four-engined bomber more precise. It is an accessory for a plastic kit, not a model of the aircraft.
10 left
14 €10.52 € You save 3.48 €
Rise144models144RM0201:144

1:144 Panavia TORNADO Ladder for Revell kit

1:144 Panavia Tornado boarding ladder is a small resin accessory for a model of the Tornado in 1:144 scale. It is not a kit of an aircraft but a standalone detail that brings an aircraft on the flight line to life. Intended for the Revell kit.
In stock
4.36 €
US Earth Red 17ml-25 %Stock ClearanceFavorite
VallejoVAL71293

US Earth Red 17ml

Vallejo Model Air US Earth Red is an opaque water-based acrylic paint of 17 ml for spraying with an airbrush. An earthy red-brown shade from the group of American ground vehicles.
2 leftof 6
3.16 €2.36 € You save 0.80 €
VallejoVAL71298

M495 Light Gray 17ml

Vallejo Model Color M495 Light Gray is a water-thinnable acrylic paint in a matte light gray shade, in a 17 ml bottle.
In stock
3 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.