Yahu Models 1:48 RWD-14 Czapla is a finished instrument panel for a model of the Polish observation aircraft, to be stuck in place of the plastic part.
Responsibility details are not available.
A finished accessory for building the cockpit. It replaces the plastic instrument panel part, which in kits of this scale tends to be no more than suggested in relief. It is neither a decal nor a separate kit; the part is stuck down and needs no further work.
The RWD-14 Czapla is a two-seat high-wing monoplane for cooperation with ground units and for observation, that is a machine with a good field of view and simple equipment. The cockpit was open and the instruments purely analog: airspeed indicator, altimeter, tachometer and a few more gauges on a small panel. On a type with a large cockpit opening and without a heavy canopy, the interior is clearly visible even once the model is finished, so detail in this place really does tell.
First a dry fit: lay the accessory against the plastic part and find out how much material has to be removed. Sand the relief of the gauges flat. Grip the part with tweezers and glue it with cyanoacrylate in the tiniest drops applied with a toothpick, so that the glue does not get onto the face. Once it has dried, check whether the fuselage halves still come together, and only then go on with building the interior. The recommended finishing touch is a drop of gloss varnish on each dial.
The accessory is supplied on its own, without a kit, paints and glue.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!