SALE CONTINUES! Up to 70% off plastic model kits. Limited stock remaining on selected items! here
1:35 Imitation of T-10 inspection devices (Meng)

1:35 Imitation of T-10 inspection devices (Meng)

4.76 €
Add to Cart

1:35 Imitation of T-10 inspection devices (Meng)

Imitations of the glass of the observation devices of the T-10 heavy tank in 1:35 add to a finished model periscopes and vision blocks that look like glass rather than paint. The set is made for the Meng kit.

Scale1:35
Manufacturer SX-Art
Product EAN8591111463720

Responsibility details are not available.

4.76 €
3.93 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Imitations of the glass of the observation devices of the T-10, 1:35

A small finishing add-on to a model of the T-10 heavy tank in 1:35. The set deals with the glass of the observation devices, that is of the periscopes and the vision blocks in the hatches and in the turret. Neither a kit nor individual hull parts are in the package; the items are seated onto a model that has already been built and painted. It is based on the dimensions of the Meng kit.

Working with a small item

This is an add-on where technique counts for more than experience. The item is small and glossy, so every print and every grain of dust stays on it. The proven approach is simple: tweezers with a straight slim tip, a clean degreased seat and calm. Lay the item on dry, check whether it sits into the rim, and only then seat it for good. If it does not hold on its own, a tiny drop of clear glue made for clear parts, which does not fog them, will help. Steer well clear of ordinary cyanoacrylate glue near the glass, as its fumes will make a matte film without fail.

The size of the item and the scale

In 1:35 the vision block of a heavy tank is large enough to be handled with tweezers, and at the same time small enough that you spot a mistake at once. That is exactly why the sets are cut to one scale: in 1:72 items of this size could neither be sensibly gripped nor placed, and their visual gain would not outweigh the risk of scratching the clear coat around them.

In short

  • Applied only to a finished, painted and clear coated model.
  • Handled with tweezers; do not grip an item by its glossy side.
  • A dry fit before the final seating.
  • Keep cyanoacrylate glue away from the glass, as it could fog it.

Who the set is for

For the modeler who builds Soviet armor in 1:35 and wants to finish off the detail by which a model is judged; even a less experienced builder will manage it, as long as they set aside some calm for the work.

This is an add-on to a plastic model. The base Meng kit, the paints and the glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

With tweezers with a fine tip onto a degreased and clean seat. We recommend a dry fit first and only then the final seating.

If it is needed, with a clear glue made for clear parts. Ordinary cyanoacrylate glue can fog glass with its fumes.

Yes, it is a matter of patience rather than experience. The conditions are tweezers, a clean surface and a perfectly dry clear coat under the item.

For the Meng kit in 1:35. The base kit is not included in the package.

Last seen

SX-ArtSXA360341:35

1:35 Imitation of T-10 inspection devices (Meng)

Imitations of the glass of the observation devices of the T-10 heavy tank in 1:35 add to a finished model periscopes and vision blocks that look like glass rather than paint. The set is made for the Meng kit.
In stock
4.76 €
Number FiveN5-F014

Ředidlo na lak - Lacquer Thinner 30 ml

Number Five Lacquer Thinner 30 ml is a thinner for the clear 2K varnishes and paints of this range, also suitable for cleaning tools.
In stock
5.16 €
DecalcasDCL-PAR080

Castle nut with split pin 0,55mm, 0,7mm, 0,8mm, 0,9mm, 1,0mm

Castle nut with split pin 0.55 - 1.0 mm is a resin detail set of castle nuts with a split pin in five smaller sizes from Decalcas.
In stock
8.76 €
BANON DESIGNBAN506-05

BAN506 flat rivet 0,5mm

Imitation rivets with a flat head 0.5 mm in size. The finest dimension of the family for the fine riveting of smooth surfaces.
In stock
10.36 €
ETA dioramaETA1191:16

1:16 Oak Leaves

Oak leaves 1:16 are laser-cut scenic leaves for creating realistic foliage on trees and bushes in large-scale dioramas.
In stock
3.96 €
Dead DesignNM320221:32

1:32 McDonnell F-4G Phantom II

The Dead Design 1:32 McDonnell F-4G Phantom II masking set is for spraying the glazing frames accurately. It is not a model of the aircraft but an accessory for the build.
In stock
9.60 €
Rise144models144RM0721:144

1:144 JP 233 Cluster bomb dispenser, w/ pylons, flir

JP 233 cluster bomb dispenser with pylons and FLIR 1:144 is a 3D-printed resin accessory set from Rise144models for models of combat aircraft.
In stock
5.16 €
Green Stuff WorldGSW1321

Letters and Numbers 4 mm STANDARD

Letters and Numbers 4 mm STANDARD is a set of letters and numbers 4 mm tall in a neutral typeface from Green Stuff World for technical labels and small markings.
In stock
5.96 €
Art ScaleASKM482231:48

1:48 B-26B Marauder one-sided express fit mask for ICM

B-26B Marauder single-sided express fit painting mask 1:48 by Art Scale makes it easier to paint the glazing of the model precisely. The target kit is the ICM one.
In stock
7.96 €
MN-hobby16D0051:16

1:16 Poslední bitva

A figure set in 1:16 scale under the name Posledni bitva. A large scale for modelers who want to indulge themselves in painting a figure.
In stock
139.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.