LACI 1:144 SE 210 Caravelle III / VI / 10R Landing Flaps is a resin set of extended high-lift devices for a model of the French Caravelle jet airliner. It is an accessory to a plastic kit, not a model of an airplane.
Responsibility details are not available.
An accessory resin set with which a Caravelle model can be built with the high-lift devices of the wing extended. The set replaces the parts of a plastic kit and, according to the manufacturer, can be used for the III, VI and 10R versions alike. It is not a kit of an airplane; the base model has to be bought separately.
The SE 210 Caravelle was a French jet airliner for medium routes and one of the first European jet transports of all. It entered service at the end of the 1950s and introduced a layout that then spread all over the world: a pair of engines placed on the sides of the rear fuselage and a clean wing without nacelles. The forward fuselage with its characteristic triangular windows was based on the design of a British predecessor. The III and VI versions were among the first series with Rolls-Royce Avon engines, while the later 10R moved to American turbofan engines. For a modeler the Caravelle is rewarding precisely because of the cleanness of its wing, on which extended devices show at once.
Wash the resin parts in lukewarm water with detergent to remove the mold release agent. Cut the casting blocks off with a fine saw and level the surfaces by sanding with breathing protection, best of all wet. The trailing section of the wing is cut away from the kit, so check the position of the cut with a dry trial first and only then work with a cutter. It is glued with cyanoacrylate glue; cement for plastic has nothing to dissolve here. Apply a primer before painting, which evens out the difference between resin and plastic. Most Caravelles carried a polished or glossy metal lower fuselage and a light upper surface, so the time spent on the smoothness of the surface pays off - glossy finishes reveal every scratch and every seam that is not sanded home.
This is an accessory set, not a stand-alone model. The base kit, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!